[PATCH v2] dmaengine: qcom: bam_dma: check if the runtime pm enabled

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Disabling pm runtime at probe is not sufficient to get BAM working
on remotely controller instances. pm_runtime_get_sync() would return
-EACCES in such cases.
So check if runtime pm is enabled before returning error from bam functions.

Fixes: 5b4a68952a89 ("dmaengine: qcom: bam_dma: disable runtime pm on remote controlled")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
 drivers/dma/qcom/bam_dma.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/dma/qcom/bam_dma.c b/drivers/dma/qcom/bam_dma.c
index d29275b97e84..4a828c18099a 100644
--- a/drivers/dma/qcom/bam_dma.c
+++ b/drivers/dma/qcom/bam_dma.c
@@ -524,6 +524,14 @@ static int bam_alloc_chan(struct dma_chan *chan)
 	return 0;
 }
 
+static int bam_pm_runtime_get_sync(struct device *dev)
+{
+	if (pm_runtime_enabled(dev))
+		return pm_runtime_get_sync(dev);
+
+	return 0;
+}
+
 /**
  * bam_free_chan - Frees dma resources associated with specific channel
  * @chan: specified channel
@@ -539,7 +547,7 @@ static void bam_free_chan(struct dma_chan *chan)
 	unsigned long flags;
 	int ret;
 
-	ret = pm_runtime_get_sync(bdev->dev);
+	ret = bam_pm_runtime_get_sync(bdev->dev);
 	if (ret < 0)
 		return;
 
@@ -720,7 +728,7 @@ static int bam_pause(struct dma_chan *chan)
 	unsigned long flag;
 	int ret;
 
-	ret = pm_runtime_get_sync(bdev->dev);
+	ret = bam_pm_runtime_get_sync(bdev->dev);
 	if (ret < 0)
 		return ret;
 
@@ -746,7 +754,7 @@ static int bam_resume(struct dma_chan *chan)
 	unsigned long flag;
 	int ret;
 
-	ret = pm_runtime_get_sync(bdev->dev);
+	ret = bam_pm_runtime_get_sync(bdev->dev);
 	if (ret < 0)
 		return ret;
 
@@ -852,7 +860,7 @@ static irqreturn_t bam_dma_irq(int irq, void *data)
 	if (srcs & P_IRQ)
 		tasklet_schedule(&bdev->task);
 
-	ret = pm_runtime_get_sync(bdev->dev);
+	ret = bam_pm_runtime_get_sync(bdev->dev);
 	if (ret < 0)
 		return ret;
 
@@ -969,7 +977,7 @@ static void bam_start_dma(struct bam_chan *bchan)
 	if (!vd)
 		return;
 
-	ret = pm_runtime_get_sync(bdev->dev);
+	ret = bam_pm_runtime_get_sync(bdev->dev);
 	if (ret < 0)
 		return;
 
-- 
2.16.2

--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux