On Sat, Apr 28, 2018 at 10:40:43AM +0530, Vinod Koul wrote: > On Fri, Apr 27, 2018 at 05:18:29PM +0200, Lars-Peter Clausen wrote: > > On 04/27/2018 05:15 PM, Moritz Fischer wrote: > > > Hi Vinod, > > > > > > On Fri, Apr 27, 2018 at 12:08 AM, Vinod Koul <vinod.koul@xxxxxxxxx> wrote: > > >> On Fri, Apr 27, 2018 at 08:53:39AM +0200, Lars-Peter Clausen wrote: > > >>> On 04/27/2018 07:11 AM, Vinod Koul wrote: > > >>>> On Thu, Apr 26, 2018 at 10:40:00AM -0700, Moritz Fischer wrote: > > >>>>> Request IRQ with IRQF_SHARED flag. This works since the interrupt > > >>>>> handler already checks if there is an actual IRQ pending and returns > > >>>>> IRQ_NONE otherwise. > > >>>> > > >>>> hmmm what are we trying to fix here? Is your device on a shared line or not? > > >>> > > >>> IRQF_SHARED does not mean that the IRQ is on a shared line. It means that > > >>> the driver can handle it if the IRQ is on a shared line. Since the driver > > >>> can handle it setting the flag is a good idea since this enables usecases > > >>> where the line is shared. > > >> > > >> Yes that is correct indeed, but what is the motivation for the change. > > >> > > >> If you never expect this to be in shared environment why to do this? > > >> Sorry but "it works" is not a good enough reason for this change, to enable > > >> usecases where the line is shared is a good reason :) > > > > > > Remember, this is an FPGA soft core. I happen to have a design [1] where it > > > is hooked up with multiple of them on one IRQ line, so to make this work, > > > I need this change. > > > > I think what Vinod is asking for is a change to the commit message saying > > that "this change enables the driver to be used with devices where the > > interrupt line is shared". > > Correct, changelog need to reflect why a change was made, down the line > people need to know the reasons, sometimes it might be even you.. Ok, communication is hard :) Will resubmit with fixed commit message, Thanks for your feedback, Moritz -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html