Hi Vinod,
On Fri, 2018-03-02 at 13:44 +0530, Vinod Koul wrote:
> On Mon, Feb 26, 2018 at 05:56:28PM +0300, Eugeniy Paltsev wrote:
> > This patch adds documentation of device tree bindings for the Synopsys
> > DesignWare AXI DMA controller.
> >
> > Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@xxxxxxxxxxxx>
> > ---
> > .../devicetree/bindings/dma/snps,dw-axi-dmac.txt | 41 ++++++++++++++++++++++
> > 1 file changed, 41 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt
> >
> > diff --git a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt
> > new file mode 100644
> > index 0000000..f237b79
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt
> > @@ -0,0 +1,41 @@
> > +Synopsys DesignWare AXI DMA Controller
> > +
> > +Required properties:
> > +- compatible: "snps,axi-dma-1.01a"
> > +- reg: Address range of the DMAC registers. This should include
> > + all of the per-channel registers.
> > +- interrupt: Should contain the DMAC interrupt number.
> > +- interrupt-parent: Should be the phandle for the interrupt controller
> > + that services interrupts for this device.
> > +- dma-channels: Number of channels supported by hardware.
> > +- snps,dma-masters: Number of AXI masters supported by the hardware.
> > +- snps,data-width: Maximum AXI data width supported by hardware.
> > + (0 - 8bits, 1 - 16bits, 2 - 32bits, ..., 6 - 512bits)
> > +- snps,priority: Priority of channel. Array size is equal to the number of
> > + dma-channels. Priority value must be programmed within [0:dma-channels-1]
> > + range. (0 - minimum priority)
> > +- snps,block-size: Maximum block size supported by the controller channel.
> > + Array size is equal to the number of dma-channels.
> > +
> > +Optional properties:
> > +- snps,axi-max-burst-len: Restrict master AXI burst length by value specified
> > + in this property. If this property is missing the maximum AXI burst length
> > + supported by DMAC is used. [1:256]
> > +
> > +Example:
> > +
> > +dmac: dma-controller@80000 {
> > + compatible = "snps,axi-dma-1.01a";
>
> do we need "snps here..?
Synopsys is this IP-block vendor so shouldn't we put it that way?
-Alexey��.n��������+%������w��{.n��������)�)�� jg��� �����ݢj����G���� ���j:+v���w�m������w�������h�����٥
