The driver also supports 2_BYTES and 1_BYTE in sdma_prep_slave_sg(). So this patch just adds them to the lists. Signed-off-by: Nicolin Chen <nicoleotsuka@xxxxxxxxx> --- drivers/dma/imx-sdma.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index a67ec1b..2be8d0d 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -178,6 +178,10 @@ #define SDMA_WATERMARK_LEVEL_HWE BIT(29) #define SDMA_WATERMARK_LEVEL_CONT BIT(31) +#define SDMA_DMA_BUSWIDTHS (BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \ + BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \ + BIT(DMA_SLAVE_BUSWIDTH_4_BYTES)) + /* * Mode/Count of data node descriptors - IPCv2 */ @@ -1851,8 +1855,8 @@ static int sdma_probe(struct platform_device *pdev) sdma->dma_device.device_prep_dma_cyclic = sdma_prep_dma_cyclic; sdma->dma_device.device_config = sdma_config; sdma->dma_device.device_terminate_all = sdma_disable_channel_with_delay; - sdma->dma_device.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES); - sdma->dma_device.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES); + sdma->dma_device.src_addr_widths = SDMA_DMA_BUSWIDTHS; + sdma->dma_device.dst_addr_widths = SDMA_DMA_BUSWIDTHS; sdma->dma_device.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV); sdma->dma_device.residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT; sdma->dma_device.device_issue_pending = sdma_issue_pending; -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
