Re: [PATCH v2 2/2] dma: sprd: Add Spreadtrum DMA driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Aug 29, 2017 at 04:47:17PM +0800, Baolin Wang wrote:

> +config SPRD_DMA
> +	bool "Spreadtrum DMA support"
> +	depends on ARCH_SPRD

can you also add compile test to this, it helps in getting good coverage and
easy to compile changes

> +/* DMA global registers definition */
> +#define DMA_GLB_PAUSE			0x0
> +#define DMA_GLB_FRAG_WAIT		0x4
> +#define DMA_GLB_REQ_PEND0_EN		0x8
> +#define DMA_GLB_REQ_PEND1_EN		0xc
> +#define DMA_GLB_INT_RAW_STS		0x10
> +#define DMA_GLB_INT_MSK_STS		0x14
> +#define DMA_GLB_REQ_STS			0x18
> +#define DMA_GLB_CHN_EN_STS		0x1c
> +#define DMA_GLB_DEBUG_STS		0x20
> +#define DMA_GLB_ARB_SEL_STS		0x24
> +#define DMA_GLB_CHN_START_CHN_CFG1	0x28
> +#define DMA_GLB_CHN_START_CHN_CFG2	0x2c
> +#define DMA_CHN_LLIST_OFFSET		0x10
> +#define DMA_GLB_REQ_CID_OFFSET		0x2000
> +#define DMA_GLB_REQ_CID(uid)		(0x4 * ((uid) - 1))

namespaced properly please, here and rest..

> +static int sprd_dma_enable(struct sprd_dma_dev *sdev)
> +{
> +	int ret;
> +
> +	ret = clk_prepare_enable(sdev->clk);
> +	if (ret)
> +		return ret;
> +
> +	if (!IS_ERR(sdev->ashb_clk))

that looks odd, can you explain this?

> +static void sprd_dma_set_uid(struct sprd_dma_chn *schan)
> +{
> +	struct sprd_dma_dev *sdev = to_sprd_dma_dev(&schan->vc.chan);
> +	u32 dev_id = schan->dev_id;
> +
> +	if (dev_id != DMA_SOFTWARE_UID) {
> +		unsigned long uid_offset = DMA_GLB_REQ_CID_OFFSET +
> +			DMA_GLB_REQ_CID(dev_id);

right justified pls

> +static void sprd_dma_enable_chn(struct sprd_dma_chn *schan)
> +{
> +	u32 cfg = readl(schan->chn_base + DMA_CHN_CFG);
> +
> +	cfg |= DMA_CHN_EN;
> +	writel(cfg, schan->chn_base + DMA_CHN_CFG);

how about add a sprd_updatel() helper which does read modify and update for
you. This way you can save quite a bit of code above...

> +static enum dma_int_type sprd_dma_get_int_type(struct sprd_dma_chn *schan)
> +{
> +	u32 intc_sts = readl(schan->chn_base + DMA_CHN_INTC) & DMA_CHN_INT_STS;
> +
> +	switch (intc_sts) {
> +	case CFGERR_INT_STS:
> +		return CONFIG_ERR;

empty line after each return pls

> +static void sprd_dma_free_chan_resources(struct dma_chan *chan)
> +{
> +	struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&schan->vc.lock, flags);
> +	sprd_dma_stop(schan);
> +	spin_unlock_irqrestore(&schan->vc.lock, flags);
> +
> +	vchan_free_chan_resources(&schan->vc);
> +	pm_runtime_put_sync(chan->device->dev);

why put_sync()

> +static enum dma_status sprd_dma_tx_status(struct dma_chan *chan,
> +					  dma_cookie_t cookie,
> +					  struct dma_tx_state *txstate)
> +{
> +	struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
> +	unsigned long flags;
> +	enum dma_status ret;
> +
> +	ret = dma_cookie_status(chan, cookie, txstate);
> +
> +	spin_lock_irqsave(&schan->vc.lock, flags);
> +	txstate->residue = sprd_dma_get_dst_addr(schan);

I dont think this is correct, the residue needs to be read only for current
cookie and the query might be for one which is not even submitted

> +	hw->intc = CFG_ERROR_INT_EN;
> +	switch (irq_mode) {
> +	case NO_INT:
> +		break;
> +	case FRAG_DONE:
> +		hw->intc |= FRAG_INT_EN;
> +		break;
> +	case BLK_DONE:
> +		hw->intc |= BLK_INT_EN;
> +		break;
> +	case BLOCK_FRAG_DONE:
> +		hw->intc |= BLK_INT_EN | FRAG_INT_EN;
> +		break;
> +	case TRANS_DONE:
> +		hw->intc |= TRANS_INT_EN;
> +		break;
> +	case TRANS_FRAG_DONE:
> +		hw->intc |= TRANS_INT_EN | FRAG_INT_EN;
> +		break;
> +	case TRANS_BLOCK_DONE:
> +		hw->intc |= TRANS_INT_EN | BLK_INT_EN;
> +		break;
> +	case LIST_DONE:
> +		hw->intc |= LIST_INT_EN;
> +		break;
> +	case CONFIG_ERR:
> +		hw->intc |= CFG_ERROR_INT_EN;
> +		break;
> +	default:
> +		dev_err(sdev->dma_dev.dev, "set irq mode failed\n");

that seems a wrong log to me, you got invalid irq_mode...

> +struct dma_async_tx_descriptor *sprd_dma_prep_dma_memcpy(struct dma_chan *chan,
> +							 dma_addr_t dest,
> +							 dma_addr_t src,
> +							 size_t len,
> +							 unsigned long flags)
> +{
> +	struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
> +	struct sprd_dma_desc *sdesc;
> +	int ret;
> +
> +	sdesc = kzalloc(sizeof(struct sprd_dma_desc), GFP_ATOMIC);

GFP_NOWAIT pls

> +static int sprd_dma_probe(struct platform_device *pdev)
> +{
> +	struct device_node *np = pdev->dev.of_node;
> +	struct sprd_dma_dev *sdev;
> +	struct sprd_dma_chn *dma_chn;
> +	struct resource *res;
> +	u32 chn_count;
> +	int ret, i;
> +
> +	ret = of_property_read_u32(np, "#dma-channels", &chn_count);
> +	if (ret) {
> +		dev_err(&pdev->dev, "get dma channels count failed\n");
> +		return ret;
> +	}
> +
> +	sdev = devm_kzalloc(&pdev->dev, (sizeof(*sdev) +
> +			    (sizeof(struct sprd_dma_chn) * chn_count)),
> +			    GFP_KERNEL);
> +	if (!sdev)
> +		return -ENOMEM;
> +
> +	sdev->clk = devm_clk_get(&pdev->dev, "enable");
> +	if (IS_ERR(sdev->clk)) {
> +		dev_err(&pdev->dev, "get enable clock failed\n");
> +		return PTR_ERR(sdev->clk);
> +	}
> +
> +	/* ashb clock is optional for AGCP DMA */
> +	sdev->ashb_clk = devm_clk_get(&pdev->dev, "ashb_eb");
> +	if (IS_ERR(sdev->ashb_clk))
> +		dev_warn(&pdev->dev, "no optional ashb eb clock\n");
> +
> +	sdev->irq = platform_get_irq(pdev, 0);
> +	if (sdev->irq > 0) {
> +		ret = devm_request_irq(&pdev->dev, sdev->irq, dma_irq_handle,
> +				       0, "sprd_dma", (void *)sdev);

so after this your driver should be able to handle the urq, are you ready
for that, I think not

> +static int sprd_dma_remove(struct platform_device *pdev)
> +{
> +	struct sprd_dma_dev *sdev = platform_get_drvdata(pdev);
> +	int ret;
> +
> +	ret = pm_runtime_get_sync(&pdev->dev);
> +	if (ret < 0)
> +		return ret;
> +
> +	dma_async_device_unregister(&sdev->dma_dev);
> +	sprd_dma_disable(sdev);

and irq is not freed, how do you guarantee that irqs are not scheduled
anymore and all tasklets running have completed and cant be further
scheduled?

> +static int __init sprd_dma_init(void)
> +{
> +	return platform_driver_register(&sprd_dma_driver);
> +}
> +arch_initcall_sync(sprd_dma_init);
> +
> +static void __exit sprd_dma_exit(void)
> +{
> +	platform_driver_unregister(&sprd_dma_driver);
> +}
> +module_exit(sprd_dma_exit);

module_platform_driver() pls

> +
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("DMA driver for Spreadtrum");
> +MODULE_AUTHOR("Baolin Wang <baolin.wang@xxxxxxxxxxxxxx>");

no MODULE_ALIAS?

-- 
~Vinod
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux