On 08/01/2017 12:34 AM, Johannes Thumshirn wrote: > Dave Jiang <dave.jiang@xxxxxxxxx> writes: > >> Adding DMA support for pmem blk reads. This provides signficant CPU >> reduction with large memory reads with good performance. DMAs are triggered >> with test against bio_multiple_segment(), so the small I/Os (4k or less?) >> are still performed by the CPU in order to reduce latency. By default >> the pmem driver will be using blk-mq with DMA. >> >> Numbers below are measured against pmem simulated via DRAM using >> memmap=NN!SS. DMA engine used is the ioatdma on Intel Skylake Xeon >> platform. Keep in mind the performance for actual persistent memory >> will differ. >> Fio 2.21 was used. >> >> 64k: 1 task queuedepth=1 >> CPU Read: 7631 MB/s 99.7% CPU DMA Read: 2415 MB/s 54% CPU >> CPU Write: 3552 MB/s 100% CPU DMA Write 2173 MB/s 54% CPU >> >> 64k: 16 tasks queuedepth=16 >> CPU Read: 36800 MB/s 1593% CPU DMA Read: 29100 MB/s 607% CPU >> CPU Write 20900 MB/s 1589% CPU DMA Write: 23400 MB/s 585% CPU >> >> 2M: 1 task queuedepth=1 >> CPU Read: 6013 MB/s 99.3% CPU DMA Read: 7986 MB/s 59.3% CPU >> CPU Write: 3579 MB/s 100% CPU DMA Write: 5211 MB/s 58.3% CPU >> >> 2M: 16 tasks queuedepth=16 >> CPU Read: 18100 MB/s 1588% CPU DMA Read: 21300 MB/s 180.9% CPU >> CPU Write: 14100 MB/s 1594% CPU DMA Write: 20400 MB/s 446.9% CPU >> >> Signed-off-by: Dave Jiang <dave.jiang@xxxxxxxxx> >> --- > > Hi Dave, > > The above table shows that there's a performance benefit for 2M > transfers but a regression for 64k transfers, if we forget about the CPU > utilization for a second. Would it be beneficial to have heuristics on > the transfer size that decide when to use dma and when not? You > introduced this hunk: > > - rc = pmem_handle_cmd(cmd); > + if (cmd->chan && bio_multiple_segments(req->bio)) > + rc = pmem_handle_cmd_dma(cmd, op_is_write(req_op(req))); > + else > + rc = pmem_handle_cmd(cmd); > > Which utilizes dma for bios with multiple segments and for single > segment bios you use the old path, maybe the single/multi segment logic > can be amended to have something like: > > if (cmd->chan && bio_segments(req->bio) > PMEM_DMA_THRESH) > rc = pmem_handle_cmd_dma(cmd, op_is_write(req_op(req)); > else > rc = pmem_handle_cmd(cmd); Yes good idea. I will introduce a thresh parameter that's tune-able. > > Just something woth considering IMHO. > >> + len = blk_rq_payload_bytes(req); >> + page = virt_to_page(pmem_addr); >> + off = (u64)pmem_addr & ~PAGE_MASK; > > off = offset_in_page(pmem_addr); ? Thanks. Will fix. -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
