This patch implements the STM32 DMAMUX driver.
The DMAMUX request multiplexer allows routing a DMA request line between
the peripherals and the DMA controllers of the product. The routing
function is ensured by a programmable multi-channel DMA request line
multiplexer. Each channel selects a unique DMA request line,
unconditionally or synchronously with events from its DMAMUX
synchronization inputs. The DMAMUX may also be used as a DMA request
generator from programmable events on its input trigger signals
Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@xxxxxxxxx>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxx>
---
Version history:
v2:
* Dynamic channelID allocation.
* Change of_property_... by device_property.
* New clock management.
* DMAMUX Configuration API.
---
---
drivers/dma/Kconfig | 9 ++
drivers/dma/Makefile | 1 +
drivers/dma/stm32-dmamux.c | 253 +++++++++++++++++++++++++++++++++++++++
include/linux/dma/stm32-dmamux.h | 21 ++++
4 files changed, 284 insertions(+)
create mode 100644 drivers/dma/stm32-dmamux.c
create mode 100644 include/linux/dma/stm32-dmamux.h
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index fa8f9c0..34d9088 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -477,6 +477,15 @@ config STM32_DMA
If you have a board based on such a MCU and wish to use DMA say Y
here.
+config STM32_DMAMUX
+ bool "STMicroelectronics STM32 dma multiplexer support"
+ depends on STM32_DMA || COMPILE_TEST
+ help
+ Enable support for the on-chip DMA multiplexer on STMicroelectronics
+ STM32 MCUs.
+ If you have a board based on such a MCU and wish to use DMAMUX say Y
+ here.
+
config S3C24XX_DMAC
bool "Samsung S3C24XX DMA support"
depends on ARCH_S3C24XX || COMPILE_TEST
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index d12ab29..96bd47e 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -58,6 +58,7 @@ obj-$(CONFIG_RENESAS_DMA) += sh/
obj-$(CONFIG_SIRF_DMA) += sirf-dma.o
obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o
obj-$(CONFIG_STM32_DMA) += stm32-dma.o
+obj-$(CONFIG_STM32_DMAMUX) += stm32-dmamux.o
obj-$(CONFIG_S3C24XX_DMAC) += s3c24xx-dma.o
obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o
obj-$(CONFIG_TEGRA20_APB_DMA) += tegra20-apb-dma.o
diff --git a/drivers/dma/stm32-dmamux.c b/drivers/dma/stm32-dmamux.c
new file mode 100644
index 0000000..ba39178
--- /dev/null
+++ b/drivers/dma/stm32-dmamux.c
@@ -0,0 +1,253 @@
+/*
+ * DMA Router driver for STM32 DMA MUX
+ *
+ * Copyright (C) 2017 M'Boumba Cedric Madianga <cedric.madianga@xxxxxxxxx>
+ *
+ * Based on TI DMA Crossbar driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/of_device.h>
+#include <linux/of_dma.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/dma/stm32-dmamux.h>
+
+#define STM32_DMAMUX_CCR(x) (0x4 * (x))
+#define STM32_DMAMUX_MAX_CHANNELS 32
+#define STM32_DMAMUX_MAX_REQUESTS 255
+
+struct stm32_dmamux {
+ u32 request;
+ u32 chan_id;
+ bool busy;
+};
+
+struct stm32_dmamux_data {
+ struct dma_router dmarouter;
+ struct clk *clk;
+ struct reset_control *rst;
+ void __iomem *iomem;
+ u32 dmamux_requests; /* number of DMA requests connected to DMAMUX */
+ u32 dmamux_channels; /* Number of DMA channels supported */
+ spinlock_t lock; /* Protects register access */
+};
+
+static inline u32 stm32_dmamux_read(void __iomem *iomem, u32 reg)
+{
+ return readl_relaxed(iomem + reg);
+}
+
+static inline void stm32_dmamux_write(void __iomem *iomem, u32 reg, u32 val)
+{
+ writel_relaxed(val, iomem + reg);
+}
+
+int stm32_dmamux_set_config(struct device *dev, void *route_data, u32 chan_id)
+{
+ struct stm32_dmamux_data *dmamux = dev_get_drvdata(dev);
+ struct stm32_dmamux *mux = route_data;
+ u32 request = mux->request;
+ unsigned long flags;
+ int ret;
+
+ if (chan_id >= dmamux->dmamux_channels) {
+ dev_err(dev, "invalid channel id\n");
+ return -EINVAL;
+ }
+
+ /* Set dma request */
+ spin_lock_irqsave(&dmamux->lock, flags);
+ if (!IS_ERR(dmamux->clk)) {
+ ret = clk_enable(dmamux->clk);
+ if (ret < 0) {
+ spin_unlock_irqrestore(&dmamux->lock, flags);
+ dev_err(dev, "clk_prep_enable issue: %d\n", ret);
+ return ret;
+ }
+ }
+
+ stm32_dmamux_write(dmamux->iomem, STM32_DMAMUX_CCR(chan_id), request);
+
+ mux->chan_id = chan_id;
+ mux->busy = true;
+ spin_unlock_irqrestore(&dmamux->lock, flags);
+
+ dev_dbg(dev, "Mapping dma-router%dchan%d to request%d\n", dev->id,
+ mux->chan_id, mux->request);
+
+ return 0;
+}
+
+static void stm32_dmamux_free(struct device *dev, void *route_data)
+{
+ struct stm32_dmamux_data *dmamux = dev_get_drvdata(dev);
+ struct stm32_dmamux *mux = route_data;
+ unsigned long flags;
+
+ /* Clear dma request */
+ spin_lock_irqsave(&dmamux->lock, flags);
+ if (!mux->busy) {
+ spin_unlock_irqrestore(&dmamux->lock, flags);
+ goto end;
+ }
+
+ stm32_dmamux_write(dmamux->iomem, STM32_DMAMUX_CCR(mux->chan_id), 0);
+ if (!IS_ERR(dmamux->clk))
+ clk_disable(dmamux->clk);
+ spin_unlock_irqrestore(&dmamux->lock, flags);
+
+ dev_dbg(dev, "Unmapping dma-router%dchan%d (was routed to request%d)\n",
+ dev->id, mux->chan_id, mux->request);
+
+end:
+ kfree(mux);
+}
+
+static void *stm32_dmamux_route_allocate(struct of_phandle_args *dma_spec,
+ struct of_dma *ofdma)
+{
+ struct platform_device *pdev = of_find_device_by_node(ofdma->of_node);
+ struct stm32_dmamux_data *dmamux = platform_get_drvdata(pdev);
+ struct stm32_dmamux *mux;
+
+ if (dma_spec->args_count != 3) {
+ dev_err(&pdev->dev, "invalid number of dma mux args\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (dma_spec->args[0] > dmamux->dmamux_requests) {
+ dev_err(&pdev->dev, "invalid mux request number: %d\n",
+ dma_spec->args[0]);
+ return ERR_PTR(-EINVAL);
+ }
+
+ /* The of_node_put() will be done in of_dma_router_xlate function */
+ dma_spec->np = of_parse_phandle(ofdma->of_node, "dma-masters", 0);
+ if (!dma_spec->np) {
+ dev_err(&pdev->dev, "can't get dma master\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+ if (!mux) {
+ of_node_put(dma_spec->np);
+ return ERR_PTR(-ENOMEM);
+ }
+ mux->request = dma_spec->args[0];
+
+ dma_spec->args[3] = dma_spec->args[2];
+ dma_spec->args[2] = dma_spec->args[1];
+ dma_spec->args[1] = 0;
+ dma_spec->args[0] = 0;
+ dma_spec->args_count = 4;
+
+ return mux;
+}
+
+static int stm32_dmamux_probe(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ struct device_node *dma_node;
+ struct stm32_dmamux_data *stm32_dmamux;
+ struct resource *res;
+ void __iomem *iomem;
+ int i, ret;
+
+ if (!node)
+ return -ENODEV;
+
+ stm32_dmamux = devm_kzalloc(&pdev->dev, sizeof(*stm32_dmamux),
+ GFP_KERNEL);
+ if (!stm32_dmamux)
+ return -ENOMEM;
+
+ dma_node = of_parse_phandle(node, "dma-masters", 0);
+ if (!dma_node) {
+ dev_err(&pdev->dev, "Can't get DMA master node\n");
+ return -ENODEV;
+ }
+
+ if (device_property_read_u32(&pdev->dev, "dma-channels",
+ &stm32_dmamux->dmamux_channels))
+ stm32_dmamux->dmamux_channels = STM32_DMAMUX_MAX_CHANNELS;
+
+ if (device_property_read_u32(&pdev->dev, "dma-requests",
+ &stm32_dmamux->dmamux_requests))
+ stm32_dmamux->dmamux_requests = STM32_DMAMUX_MAX_REQUESTS;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ iomem = devm_ioremap_resource(&pdev->dev, res);
+ if (!iomem)
+ return -ENOMEM;
+
+ spin_lock_init(&stm32_dmamux->lock);
+
+ stm32_dmamux->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(stm32_dmamux->clk)) {
+ dev_info(&pdev->dev, "Missing controller clock\n");
+ return PTR_ERR(stm32_dmamux->clk);
+ }
+
+ stm32_dmamux->rst = devm_reset_control_get(&pdev->dev, NULL);
+ if (!IS_ERR(stm32_dmamux->rst)) {
+ reset_control_assert(stm32_dmamux->rst);
+ udelay(2);
+ reset_control_deassert(stm32_dmamux->rst);
+ }
+
+ stm32_dmamux->iomem = iomem;
+ stm32_dmamux->dmarouter.dev = &pdev->dev;
+ stm32_dmamux->dmarouter.route_free = stm32_dmamux_free;
+
+ platform_set_drvdata(pdev, stm32_dmamux);
+
+ if (!IS_ERR(stm32_dmamux->clk)) {
+ ret = clk_prepare_enable(stm32_dmamux->clk);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "clk_prep_enable issue: %d\n", ret);
+ return ret;
+ }
+ }
+
+ /* Reset the dmamux */
+ for (i = 0; i < stm32_dmamux->dmamux_channels; i++)
+ stm32_dmamux_write(stm32_dmamux->iomem, STM32_DMAMUX_CCR(i), 0);
+
+ if (!IS_ERR(stm32_dmamux->clk))
+ clk_disable(stm32_dmamux->clk);
+
+ return of_dma_router_register(node, stm32_dmamux_route_allocate,
+ &stm32_dmamux->dmarouter);
+}
+
+static const struct of_device_id stm32_dmamux_match[] = {
+ { .compatible = "st,stm32-dmamux" },
+ {},
+};
+
+static struct platform_driver stm32_dmamux_driver = {
+ .probe = stm32_dmamux_probe,
+ .driver = {
+ .name = "stm32-dmamux",
+ .of_match_table = stm32_dmamux_match,
+ },
+};
+
+static int __init stm32_dmamux_init(void)
+{
+ return platform_driver_register(&stm32_dmamux_driver);
+}
+arch_initcall(stm32_dmamux_init);
diff --git a/include/linux/dma/stm32-dmamux.h b/include/linux/dma/stm32-dmamux.h
new file mode 100644
index 0000000..3a4eae1
--- /dev/null
+++ b/include/linux/dma/stm32-dmamux.h
@@ -0,0 +1,21 @@
+/*
+ * stm32-dmamux.h
+ *
+ * Copyright (C) M'Boumba Cedric Madianga 2017
+ * Author: M'Boumba Cedric Madianga <cedric.madianga@xxxxxxxxx>
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#ifndef __DMA_STM32_DMAMUX_H
+#define __DMA_STM32_DMAMUX_H
+
+#if defined(CONFIG_STM32_DMAMUX)
+int stm32_dmamux_set_config(struct device *dev, void *route_data, u32 chan_id);
+#else
+int stm32_dmamux_set_config(struct device *dev, void *route_data, u32 chan_id)
+{
+ return -ENODEV;
+}
+#endif /* CONFIG_STM32_DMAMUX */
+
+#endif /* __DMA_STM32_DMAMUX_H */
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
