From: Hanna Hawa <hannah@xxxxxxxxxxx>
The engine was enabled prior to its configuration, which isn't
correct. This patch relocates the activation of the XOR engine, to be
after the configuration of the XOR engine.
Fixes: 19a340b1a820 ("dmaengine: mv_xor_v2: new driver")
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Hanna Hawa <hannah@xxxxxxxxxxx>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
---
drivers/dma/mv_xor_v2.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/dma/mv_xor_v2.c b/drivers/dma/mv_xor_v2.c
index cb60e7c..211b8c0 100644
--- a/drivers/dma/mv_xor_v2.c
+++ b/drivers/dma/mv_xor_v2.c
@@ -653,9 +653,6 @@ static int mv_xor_v2_descq_init(struct mv_xor_v2_device *xor_dev)
writel((xor_dev->hw_desq & 0xFFFF00000000) >> 32,
xor_dev->dma_base + MV_XOR_V2_DMA_DESQ_BAHR_OFF);
- /* enable the DMA engine */
- writel(0, xor_dev->dma_base + MV_XOR_V2_DMA_DESQ_STOP_OFF);
-
/*
* This is a temporary solution, until we activate the
* SMMU. Set the attributes for reading & writing data buffers
@@ -699,6 +696,9 @@ static int mv_xor_v2_descq_init(struct mv_xor_v2_device *xor_dev)
reg |= MV_XOR_V2_GLOB_PAUSE_AXI_TIME_DIS_VAL;
writel(reg, xor_dev->glob_base + MV_XOR_V2_GLOB_PAUSE);
+ /* enable the DMA engine */
+ writel(0, xor_dev->dma_base + MV_XOR_V2_DMA_DESQ_STOP_OFF);
+
return 0;
}
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
