Add a DT property to control an optional external reset line Signed-off-by: Ramiro Oliveira <roliveir@xxxxxxxxxxxx> --- drivers/dma/xilinx/xilinx_dma.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-) diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c index 5c9f11b623ca..589cbb611bc8 100644 --- a/drivers/dma/xilinx/xilinx_dma.c +++ b/drivers/dma/xilinx/xilinx_dma.c @@ -32,20 +32,21 @@ */ #include <linux/bitops.h> -#include <linux/dmapool.h> +#include <linux/clk.h> #include <linux/dma/xilinx_dma.h> +#include <linux/dmapool.h> #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/io-64-nonatomic-lo-hi.h> #include <linux/io.h> #include <linux/iopoll.h> #include <linux/module.h> #include <linux/of_address.h> #include <linux/of_dma.h> -#include <linux/of_platform.h> #include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/reset.h> #include <linux/slab.h> -#include <linux/clk.h> -#include <linux/io-64-nonatomic-lo-hi.h> #include "../dmaengine.h" @@ -409,6 +410,7 @@ struct xilinx_dma_device { struct clk *rxs_clk; u32 nr_channels; u32 chan_id; + struct reset_control *rst; }; /* Macros */ @@ -2543,6 +2545,20 @@ static int xilinx_dma_probe(struct platform_device *pdev) if (IS_ERR(xdev->regs)) return PTR_ERR(xdev->regs); + xdev->rst = devm_reset_control_get_optional_shared(&pdev->dev, NULL); + if (IS_ERR(xdev->rst)) { + err = PTR_ERR(xdev->rst); + if (err == -EPROBE_DEFER) + return err; + xdev->rst = NULL; + } else { + err = reset_control_deassert(xdev->rst); + if (err) { + dev_err(xdev->dev, "error deasserting reset %d\n", err); + return err; + } + } + /* Retrieve the DMA engine properties from the device tree */ xdev->has_sg = of_property_read_bool(node, "xlnx,include-sg"); if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html