Re: [PATCH v3 1/3] usb: musb: dma: Add a DMA completion platform callback

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jan 19, 2017 at 11:06:57AM +0100, Alexandre Bailon wrote:
> Currently, the CPPI 4.1 driver is not completely generic and
> only work on dsps. This is because of IRQ management.
> Add a callback to dma_controller that could be invoked on DMA completion
> to acknodlege the IRQ.
> 
> Signed-off-by: Alexandre Bailon <abailon@xxxxxxxxxxxx>
> ---
>  drivers/usb/musb/musb_cppi41.c | 7 +++++--
>  drivers/usb/musb/musb_dma.h    | 4 ++++
>  2 files changed, 9 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c
> index 1636385..f7d3d27 100644
> --- a/drivers/usb/musb/musb_cppi41.c
> +++ b/drivers/usb/musb/musb_cppi41.c
> @@ -217,6 +217,10 @@ static void cppi41_dma_callback(void *private_data)
>  	int is_hs = 0;
>  	bool empty;
>  
> +	controller = cppi41_channel->controller;
> +	if (controller->controller.dma_callback)
> +		controller->controller.dma_callback(&controller->controller);
> +
>  	spin_lock_irqsave(&musb->lock, flags);
>  
>  	dmaengine_tx_status(cppi41_channel->dc, cppi41_channel->cookie,
> @@ -249,8 +253,6 @@ static void cppi41_dma_callback(void *private_data)
>  	 * We spin on HS (no longer than than 25us and setup a timer on
>  	 * FS to check for the bit and complete the transfer.
>  	 */
> -	controller = cppi41_channel->controller;
> -
>  	if (is_host_active(musb)) {
>  		if (musb->port1_status & USB_PORT_STAT_HIGH_SPEED)
>  			is_hs = 1;
> @@ -695,6 +697,7 @@ cppi41_dma_controller_create(struct musb *musb, void __iomem *base)
>  	controller->controller.channel_program = cppi41_dma_channel_program;
>  	controller->controller.channel_abort = cppi41_dma_channel_abort;
>  	controller->controller.is_compatible = cppi41_is_compatible;
> +	controller->controller.musb = musb;
>  
>  	ret = cppi41_dma_controller_start(controller);
>  	if (ret)
> diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h
> index 46357e1..8bea0cd 100644
> --- a/drivers/usb/musb/musb_dma.h
> +++ b/drivers/usb/musb/musb_dma.h
> @@ -181,10 +181,13 @@ dma_channel_status(struct dma_channel *c)
>   * @channel_release: call this to release a DMA channel
>   * @channel_abort: call this to abort a pending DMA transaction,
>   *	returning it to FREE (but allocated) state
> + * @platform_dma_callback: invoked on DMA completion, useful to run platform
> + *	code such IRQ acknowledgment.
>   *
>   * Controllers manage dma channels.
>   */
>  struct dma_controller {
> +	struct musb *musb;

Since musb is added here, can we clean up the corresponding one in
struct cppi41_dma_controller and struct cppi?

Regards,
-Bin.
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux