Re: [PATCH v2 3/5] usb: musb: Add support of CPPI 4.1 DMA controller to DA8xx

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



* Alexandre Bailon <abailon@xxxxxxxxxxxx> [170117 08:31]:
> On 01/17/2017 05:26 PM, Tony Lindgren wrote:
> > * Alexandre Bailon <abailon@xxxxxxxxxxxx> [170117 06:36]:
> >> Currently, only the PIO mode is supported.
> >> This add support of CPPI 4.1 to DA8xx.
> >> As the In DA8xx the CPPI 4.1 DMA is a part of the USB.
> >> Create the CPPI 4.1 device as a child of USB.
> > 
> > Are you sure there's always just one musb instance on these SoCs?
> To be honest, I only haven't check for all the SoCs.
> > 
> > If you have more than one musb instance, chances are you have an
> > additional shared wrapper IP around them just like am335x/dm814x/dm816x
> > have.
> Ok. I will check for the SoCs to see if that is required.

OK that might avoid big headaches later on if more musb instances
are found on some variants.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux