OMAP1510, OMAP5910 and OMAP310 have only 9 logical channels.
OMAP1610, OMAP5912, OMAP1710, OMAP730, and OMAP850 have 16 logical channels
available.
The wired 17 for the lch_count must have been used to cover the 16 + 1
dedicated LCD channel, in reality we can only use 9 or 16 channels.
The d->chan_count is not used by the omap-dma stack, so we can skip the
setup. chan_count was configured to the number of logical channels and not
the actual number of physical channels anyways.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
---
arch/arm/mach-omap1/dma.c | 16 +++++++---------
1 file changed, 7 insertions(+), 9 deletions(-)
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index f6ba589cd312..c821c1d5610e 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -32,7 +32,6 @@
#include "soc.h"
#define OMAP1_DMA_BASE (0xfffed800)
-#define OMAP1_LOGICAL_DMA_CH_COUNT 17
static u32 enable_1510_mode;
@@ -348,8 +347,6 @@ static int __init omap1_system_dma_init(void)
goto exit_iounmap;
}
- d->lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
-
/* Valid attributes for omap1 plus processors */
if (cpu_is_omap15xx())
d->dev_caps = ENABLE_1510_MODE;
@@ -366,13 +363,14 @@ static int __init omap1_system_dma_init(void)
d->dev_caps |= CLEAR_CSR_ON_READ;
d->dev_caps |= IS_WORD_16;
- if (cpu_is_omap15xx())
- d->chan_count = 9;
- else if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
- if (!(d->dev_caps & ENABLE_1510_MODE))
- d->chan_count = 16;
+ /* available logical channels */
+ if (cpu_is_omap15xx()) {
+ d->lch_count = 9;
+ } else {
+ if (d->dev_caps & ENABLE_1510_MODE)
+ d->lch_count = 9;
else
- d->chan_count = 9;
+ d->lch_count = 16;
}
p = dma_plat_info;
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
