iDMA 32-bit is Intel designed DMA controller that behaves like Synopsys
Designware DMA. This patch adds a support of the new Intel hardware.
Due to iDMA 32-bit has no autoconfiguration the platform code must provide a
platform data to dw_dma_probe().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
drivers/dma/dw/core.c | 94 ++++++++++++++++++++++++++++++++----
include/linux/platform_data/dma-dw.h | 2 +
2 files changed, 87 insertions(+), 9 deletions(-)
diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c
index 8c2af8653520..00f6adf0041f 100644
--- a/drivers/dma/dw/core.c
+++ b/drivers/dma/dw/core.c
@@ -138,16 +138,32 @@ static void dwc_desc_put(struct dw_dma_chan *dwc, struct dw_desc *desc)
dwc->descs_allocated--;
}
-static void dwc_initialize(struct dw_dma_chan *dwc)
+static void dwc_initialize_chan_idma32(struct dw_dma_chan *dwc)
+{
+ u32 cfghi = 0;
+ u32 cfglo = 0;
+
+ /* Set default burst alignment */
+ cfglo |= IDMA32C_CFGL_DST_BURST_ALIGN | IDMA32C_CFGL_SRC_BURST_ALIGN;
+
+ /* Low 4 bits of the request lines */
+ cfghi |= IDMA32C_CFGH_DST_PER(dwc->dws.dst_id & 0xf);
+ cfghi |= IDMA32C_CFGH_SRC_PER(dwc->dws.src_id & 0xf);
+
+ /* Request line extension (2 bits) */
+ cfghi |= IDMA32C_CFGH_DST_PER_EXT(dwc->dws.dst_id >> 4 & 0x3);
+ cfghi |= IDMA32C_CFGH_SRC_PER_EXT(dwc->dws.src_id >> 4 & 0x3);
+
+ channel_writel(dwc, CFG_LO, cfglo);
+ channel_writel(dwc, CFG_HI, cfghi);
+}
+
+static void dwc_initialize_chan_dw(struct dw_dma_chan *dwc)
{
- struct dw_dma *dw = to_dw_dma(dwc->chan.device);
u32 cfghi = DWC_CFGH_FIFO_MODE;
u32 cfglo = DWC_CFGL_CH_PRIOR(dwc->priority);
bool hs_polarity = dwc->dws.hs_polarity;
- if (test_bit(DW_DMA_IS_INITIALIZED, &dwc->flags))
- return;
-
cfghi |= DWC_CFGH_DST_PER(dwc->dws.dst_id);
cfghi |= DWC_CFGH_SRC_PER(dwc->dws.src_id);
@@ -156,6 +172,19 @@ static void dwc_initialize(struct dw_dma_chan *dwc)
channel_writel(dwc, CFG_LO, cfglo);
channel_writel(dwc, CFG_HI, cfghi);
+}
+
+static void dwc_initialize(struct dw_dma_chan *dwc)
+{
+ struct dw_dma *dw = to_dw_dma(dwc->chan.device);
+
+ if (test_bit(DW_DMA_IS_INITIALIZED, &dwc->flags))
+ return;
+
+ if (dw->pdata->is_idma32)
+ dwc_initialize_chan_idma32(dwc);
+ else
+ dwc_initialize_chan_dw(dwc);
/* Enable interrupts */
channel_set_bit(dw, MASK.XFER, dwc->mask);
@@ -187,8 +216,13 @@ static inline void dwc_chan_disable(struct dw_dma *dw, struct dw_dma_chan *dwc)
static u32 bytes2block(struct dw_dma_chan *dwc, size_t bytes,
unsigned int width, size_t *len)
{
+ struct dw_dma *dw = to_dw_dma(dwc->chan.device);
u32 block;
+ /* Always in bytes for iDMA 32-bit */
+ if (dw->pdata->is_idma32)
+ width = 0;
+
if ((bytes >> width) > dwc->block_size) {
block = dwc->block_size;
*len = block << width;
@@ -202,6 +236,11 @@ static u32 bytes2block(struct dw_dma_chan *dwc, size_t bytes,
static size_t block2bytes(struct dw_dma_chan *dwc, u32 block, u32 width)
{
+ struct dw_dma *dw = to_dw_dma(dwc->chan.device);
+
+ if (dw->pdata->is_idma32)
+ return IDMA32C_CTLH_BLOCK_TS(block);
+
return DWC_CTLH_BLOCK_TS(block) << width;
}
@@ -915,6 +954,7 @@ static int dwc_config(struct dma_chan *chan, struct dma_slave_config *sconfig)
{
struct dw_dma_chan *dwc = to_dw_dma_chan(chan);
struct dma_slave_config *sc = &dwc->dma_sconfig;
+ struct dw_dma *dw = to_dw_dma(chan->device);
/*
* Fix sconfig's burst size according to dw_dmac. We need to convert
* them as:
@@ -922,7 +962,7 @@ static int dwc_config(struct dma_chan *chan, struct dma_slave_config *sconfig)
*
* NOTE: burst size 2 is not supported by DesignWare controller.
*/
- u32 s = 2;
+ u32 s = dw->pdata->is_idma32 ? 1 : 2;
/* Check if chan will be configured for slave transfers */
if (!is_slave_direction(sconfig->direction))
@@ -937,12 +977,19 @@ static int dwc_config(struct dma_chan *chan, struct dma_slave_config *sconfig)
return 0;
}
-static void dwc_chan_pause(struct dw_dma_chan *dwc)
+static void dwc_chan_pause(struct dw_dma_chan *dwc, bool drain)
{
+ struct dw_dma *dw = to_dw_dma(dwc->chan.device);
unsigned int count = 20; /* timeout iterations */
u32 cfglo;
cfglo = channel_readl(dwc, CFG_LO);
+ if (dw->pdata->is_idma32) {
+ if (drain)
+ cfglo |= IDMA32C_CFGL_CH_DRAIN;
+ else
+ cfglo &= ~IDMA32C_CFGL_CH_DRAIN;
+ }
channel_writel(dwc, CFG_LO, cfglo | DWC_CFGL_CH_SUSP);
while (!(channel_readl(dwc, CFG_LO) & DWC_CFGL_FIFO_EMPTY) && count--)
udelay(2);
@@ -956,7 +1003,7 @@ static int dwc_pause(struct dma_chan *chan)
unsigned long flags;
spin_lock_irqsave(&dwc->lock, flags);
- dwc_chan_pause(dwc);
+ dwc_chan_pause(dwc, false);
spin_unlock_irqrestore(&dwc->lock, flags);
return 0;
@@ -998,6 +1045,8 @@ static int dwc_terminate_all(struct dma_chan *chan)
clear_bit(DW_DMA_IS_SOFT_LLP, &dwc->flags);
+ dwc_chan_pause(dwc, true);
+
dwc_chan_disable(dw, dwc);
dwc_chan_resume(dwc);
@@ -1090,6 +1139,26 @@ static void dwc_issue_pending(struct dma_chan *chan)
/*----------------------------------------------------------------------*/
+static void idma32_fifo_partition(struct dw_dma *dw)
+{
+ u64 value = IDMA32C_FP_PSIZE_CH0(128) | IDMA32C_FP_PSIZE_CH1(128) |
+ IDMA32C_FP_UPDATE;
+ u64 fifo_partition = 0;
+
+ if (!dw->pdata->is_idma32)
+ return;
+
+ /* Fill FIFO_PARTITION low bits (Channels 0..1, 4..5) */
+ fifo_partition |= value << 0;
+
+ /* Fill FIFO_PARTITION high bits (Channels 2..3, 6..7) */
+ fifo_partition |= value << 32;
+
+ /* Program FIFO Partition registers - 128 bytes for each channel */
+ idma32_writeq(dw, FIFO_PARTITION1, fifo_partition);
+ idma32_writeq(dw, FIFO_PARTITION0, fifo_partition);
+}
+
static void dw_dma_off(struct dw_dma *dw)
{
unsigned int i;
@@ -1509,8 +1578,13 @@ int dw_dma_probe(struct dw_dma_chip *chip)
/* Force dma off, just in case */
dw_dma_off(dw);
+ idma32_fifo_partition(dw);
+
/* Device and instance ID for IRQ and DMA pool */
- snprintf(dw->name, sizeof(dw->name), "dw_dmac.%d", chip->id);
+ if (pdata->is_idma32)
+ snprintf(dw->name, sizeof(dw->name), "idma32.%d", chip->id);
+ else
+ snprintf(dw->name, sizeof(dw->name), "dw_dmac.%d", chip->id);
/* Create a pool of consistent memory blocks for hardware descriptors */
dw->desc_pool = dmam_pool_create(dw->name, chip->dev,
@@ -1673,6 +1747,8 @@ int dw_dma_enable(struct dw_dma_chip *chip)
{
struct dw_dma *dw = chip->dw;
+ idma32_fifo_partition(dw);
+
dw_dma_on(dw);
return 0;
}
diff --git a/include/linux/platform_data/dma-dw.h b/include/linux/platform_data/dma-dw.h
index e69e415d0d98..896cb71a382c 100644
--- a/include/linux/platform_data/dma-dw.h
+++ b/include/linux/platform_data/dma-dw.h
@@ -41,6 +41,7 @@ struct dw_dma_slave {
* @is_private: The device channels should be marked as private and not for
* by the general purpose DMA channel allocator.
* @is_memcpy: The device channels do support memory-to-memory transfers.
+ * @is_idma32: The type of the DMA controller is iDMA32
* @chan_allocation_order: Allocate channels starting from 0 or 7
* @chan_priority: Set channel priority increasing from 0 to 7 or 7 to 0.
* @block_size: Maximum block size supported by the controller
@@ -53,6 +54,7 @@ struct dw_dma_platform_data {
unsigned int nr_channels;
bool is_private;
bool is_memcpy;
+ bool is_idma32;
#define CHAN_ALLOCATION_ASCENDING 0 /* zero to seven */
#define CHAN_ALLOCATION_DESCENDING 1 /* seven to zero */
unsigned char chan_allocation_order;
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
