[PATCH 10/13] dmaengine: stm32-dma: remove unused ‘src_addr’

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In stm32_dma_set_xfer_param(), variable ‘src_addr’ is initialized but never used, which
leads to warning with W=1

drivers/dma/stm32-dma.c: In function ‘stm32_dma_set_xfer_param’:
drivers/dma/stm32-dma.c:577:13: warning: variable ‘src_addr’ set but not used [-Wunused-but-set-variable]
  dma_addr_t src_addr, dst_addr;

So remove it.

Signed-off-by: Vinod Koul <vinod.koul@xxxxxxxxx>
---
 drivers/dma/stm32-dma.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/dma/stm32-dma.c b/drivers/dma/stm32-dma.c
index 1f09189e31d9..3688d0873a3e 100644
--- a/drivers/dma/stm32-dma.c
+++ b/drivers/dma/stm32-dma.c
@@ -573,14 +573,12 @@ static int stm32_dma_set_xfer_param(struct stm32_dma_chan *chan,
 	int src_bus_width, dst_bus_width;
 	int src_burst_size, dst_burst_size;
 	u32 src_maxburst, dst_maxburst;
-	dma_addr_t src_addr;
 	u32 dma_scr = 0;
 
 	src_addr_width = chan->dma_sconfig.src_addr_width;
 	dst_addr_width = chan->dma_sconfig.dst_addr_width;
 	src_maxburst = chan->dma_sconfig.src_maxburst;
 	dst_maxburst = chan->dma_sconfig.dst_maxburst;
-	src_addr = chan->dma_sconfig.src_addr;
 
 	switch (direction) {
 	case DMA_MEM_TO_DEV:
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux