[PATCH RFC 5/7] ASoC: samsung: pcm: Do not use platform_data for DMA parameters

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



All related platforms use either devicetree or the DMA slave
map API for mapping DMA channels to slave devices so we can now
stop using platform_data for passing DMA details.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
---
 sound/soc/samsung/pcm.c | 14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)

diff --git a/sound/soc/samsung/pcm.c b/sound/soc/samsung/pcm.c
index 43e367a..ccedab2 100644
--- a/sound/soc/samsung/pcm.c
+++ b/sound/soc/samsung/pcm.c
@@ -134,18 +134,22 @@ struct s3c_pcm_info {
 static struct snd_dmaengine_dai_dma_data s3c_pcm_stereo_out[] = {
 	[0] = {
 		.addr_width	= 4,
+		.chan_name	= "tx",
 	},
 	[1] = {
 		.addr_width	= 4,
+		.chan_name	= "tx",
 	},
 };
 
 static struct snd_dmaengine_dai_dma_data s3c_pcm_stereo_in[] = {
 	[0] = {
 		.addr_width	= 4,
+		.chan_name	= "rx",
 	},
 	[1] = {
 		.addr_width	= 4,
+		.chan_name	= "rx",
 	},
 };
 
@@ -488,7 +492,6 @@ static int s3c_pcm_dev_probe(struct platform_device *pdev)
 	struct s3c_pcm_info *pcm;
 	struct resource *mem_res;
 	struct s3c_audio_pdata *pcm_pdata;
-	dma_filter_fn filter;
 	int ret;
 
 	/* Check for valid device index */
@@ -555,13 +558,6 @@ static int s3c_pcm_dev_probe(struct platform_device *pdev)
 	s3c_pcm_stereo_in[pdev->id].addr = mem_res->start + S3C_PCM_RXFIFO;
 	s3c_pcm_stereo_out[pdev->id].addr = mem_res->start + S3C_PCM_TXFIFO;
 
-	filter = NULL;
-	if (pcm_pdata) {
-		s3c_pcm_stereo_in[pdev->id].filter_data = pcm_pdata->dma_capture;
-		s3c_pcm_stereo_out[pdev->id].filter_data = pcm_pdata->dma_playback;
-		filter = pcm_pdata->dma_filter;
-	}
-
 	pcm->dma_capture = &s3c_pcm_stereo_in[pdev->id];
 	pcm->dma_playback = &s3c_pcm_stereo_out[pdev->id];
 
@@ -574,7 +570,7 @@ static int s3c_pcm_dev_probe(struct platform_device *pdev)
 		goto err5;
 	}
 
-	ret = samsung_asoc_dma_platform_register(&pdev->dev, filter,
+	ret = samsung_asoc_dma_platform_register(&pdev->dev, NULL,
 						 NULL, NULL);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to get register DMA: %d\n", ret);
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux