The clear_bits() helper is not used by the driver so it can be removed.
powerpc architecture defines the set_bits() in
arch/powerpc/include/asm/bitops.h which results failed compile testing on
powerpc architecture:
>> drivers/dma/edma.c:415:20: error: conflicting types for 'set_bits'
static inline void set_bits(int offset, int len, unsigned long *p)
^~~~~~~~
In file included from include/linux/bitops.h:36:0,
from include/linux/kernel.h:10,
from include/linux/list.h:8,
from include/linux/kobject.h:20,
from include/linux/device.h:17,
from include/linux/dmaengine.h:20,
from drivers/dma/edma.c:16:
arch/powerpc/include/asm/bitops.h:75:14: note: previous definition of 'set_bits' was here
DEFINE_BITOP(set_bits, or, "")
^
arch/powerpc/include/asm/bitops.h:58:24: note: in definition of macro 'DEFINE_BITOP'
static __inline__ void fn(unsigned long mask, \
^~
>> drivers/dma/edma.c:421:20: error: conflicting types for 'clear_bits'
static inline void clear_bits(int offset, int len, unsigned long *p)
^~~~~~~~~~
In file included from include/linux/bitops.h:36:0,
from include/linux/kernel.h:10,
from include/linux/list.h:8,
from include/linux/kobject.h:20,
from include/linux/device.h:17,
from include/linux/dmaengine.h:20,
from drivers/dma/edma.c:16:
arch/powerpc/include/asm/bitops.h:76:14: note: previous definition of 'clear_bits' was here
DEFINE_BITOP(clear_bits, andc, "")
^
arch/powerpc/include/asm/bitops.h:58:24: note: in definition of macro 'DEFINE_BITOP'
static __inline__ void fn(unsigned long mask, \
^~
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
---
Hi,
the eDMA/sDMA/ti-crossbar COMPILE_TEST series brought up this issue reported by
Intel kbuild test robot.
Vinod: Should I send a v4 of the COMPILE_TEST series, or is it OK if this patch
goes separately? The compile test failure should not break bisect for PPC...
Regards,
Peter
drivers/dma/edma.c | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)
diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
index 0241f39ba64c..1f967545fb33 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@@ -412,18 +412,12 @@ static inline void edma_param_or(struct edma_cc *ecc, int offset, int param_no,
edma_or(ecc, EDMA_PARM + offset + (param_no << 5), or);
}
-static inline void set_bits(int offset, int len, unsigned long *p)
+static inline void edma_set_bits(int offset, int len, unsigned long *p)
{
for (; len > 0; len--)
set_bit(offset + (len - 1), p);
}
-static inline void clear_bits(int offset, int len, unsigned long *p)
-{
- for (; len > 0; len--)
- clear_bit(offset + (len - 1), p);
-}
-
static void edma_assign_priority_to_queue(struct edma_cc *ecc, int queue_no,
int priority)
{
@@ -2266,7 +2260,7 @@ static int edma_probe(struct platform_device *pdev)
for (i = 0; rsv_slots[i][0] != -1; i++) {
off = rsv_slots[i][0];
ln = rsv_slots[i][1];
- set_bits(off, ln, ecc->slot_inuse);
+ edma_set_bits(off, ln, ecc->slot_inuse);
}
}
}
--
2.10.0
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
