Bring out the interrupt cause to the top level so that MSI interrupts can be hooked at a later stage. Signed-off-by: Sinan Kaya <okaya@xxxxxxxxxxxxxx> --- drivers/dma/qcom/hidma_ll.c | 72 +++++++++++++++++++++------------------------ 1 file changed, 34 insertions(+), 38 deletions(-) diff --git a/drivers/dma/qcom/hidma_ll.c b/drivers/dma/qcom/hidma_ll.c index c911ca2..088935f 100644 --- a/drivers/dma/qcom/hidma_ll.c +++ b/drivers/dma/qcom/hidma_ll.c @@ -397,12 +397,24 @@ static int hidma_ll_reset(struct hidma_lldev *lldev) * requests traditionally to the destination, this concept does not apply * here for this HW. */ -irqreturn_t hidma_ll_inthandler(int chirq, void *arg) +static void hidma_ll_int_handler_internal(struct hidma_lldev *lldev, int cause) { - struct hidma_lldev *lldev = arg; - u32 status; - u32 enable; - u32 cause; + if (cause & HIDMA_ERR_INT_MASK) { + dev_err(lldev->dev, "error 0x%x, disabling...\n", + cause); + + /* Clear out pending interrupts */ + writel(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG); + + /* No further submissions. */ + hidma_ll_disable(lldev); + + /* Driver completes the txn and intimates the client.*/ + hidma_cleanup_pending_tre(lldev, 0xFF, + HIDMA_EVRE_STATUS_ERROR); + + return; + } /* * Fine tuned for this HW... @@ -412,45 +424,29 @@ irqreturn_t hidma_ll_inthandler(int chirq, void *arg) * interrupt delivery guarantees. Do not copy this code blindly and * expect that to work. */ - status = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG); - enable = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_EN_REG); - cause = status & enable; - - while (cause) { - if (cause & HIDMA_ERR_INT_MASK) { - dev_err(lldev->dev, "error 0x%x, disabling...\n", - cause); - - /* Clear out pending interrupts */ - writel(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG); - - /* No further submissions. */ - hidma_ll_disable(lldev); - - /* Driver completes the txn and intimates the client.*/ - hidma_cleanup_pending_tre(lldev, 0xFF, - HIDMA_EVRE_STATUS_ERROR); - goto out; - } - + while (atomic_read(&lldev->pending_tre_count)) { /* * Try to consume as many EVREs as possible. */ - hidma_handle_tre_completion(lldev); + if (hidma_handle_tre_completion(lldev, 0, 0)) + break; + } - /* We consumed TREs or there are pending TREs or EVREs. */ - writel_relaxed(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG); + /* We consumed TREs or there are pending TREs or EVREs. */ + writel_relaxed(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG); +} - /* - * Another interrupt might have arrived while we are - * processing this one. Read the new cause. - */ - status = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG); - enable = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_EN_REG); - cause = status & enable; - } +irqreturn_t hidma_ll_inthandler(int chirq, void *arg) +{ + struct hidma_lldev *lldev = arg; + u32 status; + u32 enable; + u32 cause; -out: + status = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG); + enable = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_EN_REG); + cause = status & enable; + hidma_ll_int_handler_internal(lldev, cause); return IRQ_HANDLED; } -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html