Adding a new binding for qcom,hidma-1.1 to distinguish HW supporting MSI interrupts from the older revision. Signed-off-by: Sinan Kaya <okaya@xxxxxxxxxxxxxx> --- Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt b/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt index fd5618b..47bfb5a 100644 --- a/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt +++ b/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt @@ -47,12 +47,23 @@ When the OS is not in control of the management interface (i.e. it's a guest), the channel nodes appear on their own, not under a management node. Required properties: -- compatible: must contain "qcom,hidma-1.0" +- compatible: must contain "qcom,hidma-1.0" for initial HW or "qcom,hidma-1.1" +for MSI capable HW. - reg: Addresses for the transfer and event channel - interrupts: Should contain the event interrupt - desc-count: Number of asynchronous requests this channel can handle - iommus: required a iommu node +Optional properties for MSI: +- msi-parent: pointer to the MSI controller object with the DeviceID in use. + +Example: + msi_parent: <&msi0 0x80024> + +msi0 is the MSI controller in the system. Bits 0-5 is the channel ID. 4 +is the channel ID. Bits 5-8 is the instance number. This is for the HIDMA +instance 1. + Example: Hypervisor OS configuration: -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
