[PATCH v3 1/2] dmaengine: qcom-bam-dma: Add pm_runtime support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Adds pm_runtime support for BAM DMA so that clock
is enabled only when there is a transaction going on to help
save power.

Signed-off-by: Pramod Gurav <pramod.gurav@xxxxxxxxxx>
---
Changes in v2:
- Handled return values of pm_runtime_get_sync to return error
- Rework remove function

 drivers/dma/qcom/bam_dma.c | 98 +++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 97 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/qcom/bam_dma.c b/drivers/dma/qcom/bam_dma.c
index 5b427c4..da64511 100644
--- a/drivers/dma/qcom/bam_dma.c
+++ b/drivers/dma/qcom/bam_dma.c
@@ -48,6 +48,7 @@
 #include <linux/of_dma.h>
 #include <linux/clk.h>
 #include <linux/dmaengine.h>
+#include <linux/pm_runtime.h>
 
 #include "../dmaengine.h"
 #include "../virt-dma.h"
@@ -58,6 +59,8 @@ struct bam_desc_hw {
 	u16 flags;
 };
 
+#define BAM_DMA_AUTOSUSPEND_DELAY 100
+
 #define DESC_FLAG_INT BIT(15)
 #define DESC_FLAG_EOT BIT(14)
 #define DESC_FLAG_EOB BIT(13)
@@ -528,11 +531,14 @@ static void bam_free_chan(struct dma_chan *chan)
 	u32 val;
 	unsigned long flags;
 
+	if (pm_runtime_get_sync(bdev->dev))
+		return;
+
 	vchan_free_chan_resources(to_virt_chan(chan));
 
 	if (bchan->curr_txd) {
 		dev_err(bchan->bdev->dev, "Cannot free busy channel\n");
-		return;
+		goto err;
 	}
 
 	spin_lock_irqsave(&bchan->vc.lock, flags);
@@ -550,6 +556,10 @@ static void bam_free_chan(struct dma_chan *chan)
 
 	/* disable irq */
 	writel_relaxed(0, bam_addr(bdev, bchan->id, BAM_P_IRQ_EN));
+
+err:
+	pm_runtime_mark_last_busy(bdev->dev);
+	pm_runtime_put_autosuspend(bdev->dev);
 }
 
 /**
@@ -695,11 +705,18 @@ static int bam_pause(struct dma_chan *chan)
 	struct bam_chan *bchan = to_bam_chan(chan);
 	struct bam_device *bdev = bchan->bdev;
 	unsigned long flag;
+	int ret;
+
+	ret = pm_runtime_get_sync(bdev->dev);
+	if (ret)
+		return ret;
 
 	spin_lock_irqsave(&bchan->vc.lock, flag);
 	writel_relaxed(1, bam_addr(bdev, bchan->id, BAM_P_HALT));
 	bchan->paused = 1;
 	spin_unlock_irqrestore(&bchan->vc.lock, flag);
+	pm_runtime_mark_last_busy(bdev->dev);
+	pm_runtime_put_autosuspend(bdev->dev);
 
 	return 0;
 }
@@ -714,11 +731,17 @@ static int bam_resume(struct dma_chan *chan)
 	struct bam_chan *bchan = to_bam_chan(chan);
 	struct bam_device *bdev = bchan->bdev;
 	unsigned long flag;
+	int ret;
 
+	ret = pm_runtime_get_sync(bdev->dev);
+	if (ret)
+		return ret;
 	spin_lock_irqsave(&bchan->vc.lock, flag);
 	writel_relaxed(0, bam_addr(bdev, bchan->id, BAM_P_HALT));
 	bchan->paused = 0;
 	spin_unlock_irqrestore(&bchan->vc.lock, flag);
+	pm_runtime_mark_last_busy(bdev->dev);
+	pm_runtime_put_autosuspend(bdev->dev);
 
 	return 0;
 }
@@ -967,6 +990,9 @@ static void dma_tasklet(unsigned long data)
 			bam_start_dma(bchan);
 		spin_unlock_irqrestore(&bchan->vc.lock, flags);
 	}
+
+	pm_runtime_mark_last_busy(bdev->dev);
+	pm_runtime_put_autosuspend(bdev->dev);
 }
 
 /**
@@ -978,8 +1004,13 @@ static void dma_tasklet(unsigned long data)
 static void bam_issue_pending(struct dma_chan *chan)
 {
 	struct bam_chan *bchan = to_bam_chan(chan);
+	struct bam_device *bdev = bchan->bdev;
 	unsigned long flags;
 
+	if (pm_runtime_status_suspended(bdev->dev))
+		if (pm_runtime_get_sync(bdev->dev))
+			return;
+
 	spin_lock_irqsave(&bchan->vc.lock, flags);
 
 	/* if work pending and idle, start a transaction */
@@ -1210,6 +1241,13 @@ static int bam_dma_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_unregister_dma;
 
+	pm_runtime_irq_safe(&pdev->dev);
+	pm_runtime_set_autosuspend_delay(&pdev->dev, BAM_DMA_AUTOSUSPEND_DELAY);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_mark_last_busy(&pdev->dev);
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
 	return 0;
 
 err_unregister_dma:
@@ -1230,6 +1268,8 @@ static int bam_dma_remove(struct platform_device *pdev)
 	struct bam_device *bdev = platform_get_drvdata(pdev);
 	u32 i;
 
+	pm_runtime_force_suspend(&pdev->dev);
+
 	of_dma_controller_free(pdev->dev.of_node);
 	dma_async_device_unregister(&bdev->common);
 
@@ -1257,11 +1297,67 @@ static int bam_dma_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static int bam_dma_runtime_suspend(struct device *dev)
+{
+	struct bam_device *bdev = dev_get_drvdata(dev);
+
+	clk_disable(bdev->bamclk);
+
+	return 0;
+}
+
+static int bam_dma_runtime_resume(struct device *dev)
+{
+	struct bam_device *bdev = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_enable(bdev->bamclk);
+	if (ret < 0) {
+		dev_err(dev, "clk_enable failed: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+#ifdef CONFIG_PM_SLEEP
+static int bam_dma_suspend(struct device *dev)
+{
+	struct bam_device *bdev = dev_get_drvdata(dev);
+
+	pm_runtime_force_suspend(dev);
+
+	clk_unprepare(bdev->bamclk);
+
+	return 0;
+}
+
+static int bam_dma_resume(struct device *dev)
+{
+	struct bam_device *bdev = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_prepare(bdev->bamclk);
+	if (ret)
+		return ret;
+
+	pm_runtime_force_resume(dev);
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops bam_dma_pm_ops = {
+	SET_LATE_SYSTEM_SLEEP_PM_OPS(bam_dma_suspend, bam_dma_resume)
+	SET_RUNTIME_PM_OPS(bam_dma_runtime_suspend, bam_dma_runtime_resume,
+				NULL)
+};
+
 static struct platform_driver bam_dma_driver = {
 	.probe = bam_dma_probe,
 	.remove = bam_dma_remove,
 	.driver = {
 		.name = "bam-dma-engine",
+		.pm = &bam_dma_pm_ops,
 		.of_match_table = bam_of_match,
 	},
 };
-- 
1.8.2.1

--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux