[PATCH RESEND v3 1/2] dmaengine: sun6i: Fix the access of the IRQ register

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The IRQ register number is computed, but this number was not used
and the register was the one indexed by the channel index instead.
Then, only the first DMA channel was working.

Acked-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Jean-Francois Moine <moinejf@xxxxxxx>
---
 drivers/dma/sun6i-dma.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
index 2db12e4..2ec320d 100644
--- a/drivers/dma/sun6i-dma.c
+++ b/drivers/dma/sun6i-dma.c
@@ -381,9 +381,9 @@ static int sun6i_dma_start_desc(struct sun6i_vchan *vchan)
 	irq_reg = pchan->idx / DMA_IRQ_CHAN_NR;
 	irq_offset = pchan->idx % DMA_IRQ_CHAN_NR;
 
-	irq_val = readl(sdev->base + DMA_IRQ_EN(irq_offset));
+	irq_val = readl(sdev->base + DMA_IRQ_EN(irq_reg));
 	irq_val |= DMA_IRQ_QUEUE << (irq_offset * DMA_IRQ_CHAN_WIDTH);
-	writel(irq_val, sdev->base + DMA_IRQ_EN(irq_offset));
+	writel(irq_val, sdev->base + DMA_IRQ_EN(irq_reg));
 
 	writel(pchan->desc->p_lli, pchan->base + DMA_CHAN_LLI_ADDR);
 	writel(DMA_CHAN_ENABLE_START, pchan->base + DMA_CHAN_ENABLE);
-- 
2.8.1

--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux