On 04/08/2016 01:17 AM, Andy Shevchenko wrote:
> On Fri, Apr 8, 2016 at 4:42 AM, Peter Hurley <peter@xxxxxxxxxxxxxxxxxx> wrote:
>> On 04/07/2016 01:37 PM, Andy Shevchenko wrote:
>>> Intes SoCs, such as Braswell, have DesignWare UART. Split out to separate
>>> module which also will be used for Intel Quark later.
>>
>> What's the rationale?
>
> 1. Not poison 8250_pci with too many quirks.
> 2. They all use same DMA engine, otherwise we might end up in all
> possible DMA engines included in one file.
> 3. All of them are actually DesignWare, so, in the future we might
> share code between 8250_dw and 8250_lpss.
Just my opinion, but I like to see the rationale in the changelog.
>> And this really isn't a split; this patch introduces a number of significant
>> changes from the pci version.
>
> Some style changes, yes, but "significant"?
> For example?
I'm just pointing out the changelog doesn't really match the
commit. I'm not suggesting necessarily to redo the series, but just more
adequately reflect the change. See below.
>>
>>
>>> Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
>>> ---
>>> drivers/tty/serial/8250/8250_lpss.c | 279 ++++++++++++++++++++++++++++++++++++
>>> drivers/tty/serial/8250/8250_pci.c | 227 ++---------------------------
>>> drivers/tty/serial/8250/Kconfig | 14 +-
>>> drivers/tty/serial/8250/Makefile | 1 +
>>> 4 files changed, 301 insertions(+), 220 deletions(-)
>>> create mode 100644 drivers/tty/serial/8250/8250_lpss.c
>>>
>>> diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c
>>> new file mode 100644
>>> index 0000000..bca4adb
>>> --- /dev/null
>>> +++ b/drivers/tty/serial/8250/8250_lpss.c
>>> @@ -0,0 +1,279 @@
>>> +/*
>>> + * 8250_lpss.c - Driver for UART on Intel Braswell and various other Intel SoCs
>>> + *
>>> + * Copyright (C) 2016 Intel Corporation
>>> + * Author: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify
>>> + * it under the terms of the GNU General Public License version 2 as
>>> + * published by the Free Software Foundation.
>>> + */
>>> +
>>> +#include <linux/bitops.h>
>>> +#include <linux/module.h>
>>> +#include <linux/pci.h>
>>> +#include <linux/rational.h>
>>> +
>>> +#include <linux/dmaengine.h>
>>> +#include <linux/platform_data/dma-dw.h>
>>> +
>>> +#include "8250.h"
>>> +
>>> +#define PCI_DEVICE_ID_INTEL_BYT_UART1 0x0f0a
>>> +#define PCI_DEVICE_ID_INTEL_BYT_UART2 0x0f0c
>>> +
>>> +#define PCI_DEVICE_ID_INTEL_BSW_UART1 0x228a
>>> +#define PCI_DEVICE_ID_INTEL_BSW_UART2 0x228c
>>> +
>>> +#define PCI_DEVICE_ID_INTEL_BDW_UART1 0x9ce3
>>> +#define PCI_DEVICE_ID_INTEL_BDW_UART2 0x9ce4
>>> +
>>> +/* Intel LPSS specific registers */
>>> +
>>> +#define BYT_PRV_CLK 0x800
>>> +#define BYT_PRV_CLK_EN BIT(0)
>>> +#define BYT_PRV_CLK_M_VAL_SHIFT 1
>>> +#define BYT_PRV_CLK_N_VAL_SHIFT 16
>>> +#define BYT_PRV_CLK_UPDATE BIT(31)
>>> +
>>> +#define BYT_TX_OVF_INT 0x820
>>> +#define BYT_TX_OVF_INT_MASK BIT(1)
>>> +
>>> +struct lpss8250;
>>> +
>>> +struct lpss8250_board {
>>> + unsigned long freq;
>>> + unsigned int base_baud;
>>> + int (*setup)(struct lpss8250 *, struct uart_port *p);
>>> +};
>>
>> New concept.
>>
>>> +
>>> +struct lpss8250 {
>>> + int line;
>>> + struct lpss8250_board *board;
>>> +
>>> + /* DMA parameters */
>>> + struct uart_8250_dma dma;
>>> + struct dw_dma_slave dma_param;
>>> + u8 dma_maxburst;
>>> +};
>>> +
>>> +/*****************************************************************************/
>>
>> Please remove.
>>
>>> +
>>> +static void lpss8250_set_termios(struct uart_port *p,
>>> + struct ktermios *termios,
>>> + struct ktermios *old)
>>> +{
>>> + unsigned int baud = tty_termios_baud_rate(termios);
>>> + struct lpss8250 *lpss = p->private_data;
>>> + unsigned long fref = lpss->board->freq, fuart = baud * 16;
>>> + unsigned long w = BIT(15) - 1;
>>> + unsigned long m, n;
>>> + u32 reg;
>>> +
>>> + /* Get Fuart closer to Fref */
>>> + fuart *= rounddown_pow_of_two(fref / fuart);
>>> +
>>> + /*
>>> + * For baud rates 0.5M, 1M, 1.5M, 2M, 2.5M, 3M, 3.5M and 4M the
>>> + * dividers must be adjusted.
>>> + *
>>> + * uartclk = (m / n) * 100 MHz, where m <= n
>>> + */
>>> + rational_best_approximation(fuart, fref, w, w, &m, &n);
>>> + p->uartclk = fuart;
>>> +
>>> + /* Reset the clock */
>>> + reg = (m << BYT_PRV_CLK_M_VAL_SHIFT) | (n << BYT_PRV_CLK_N_VAL_SHIFT);
>>> + writel(reg, p->membase + BYT_PRV_CLK);
>>> + reg |= BYT_PRV_CLK_EN | BYT_PRV_CLK_UPDATE;
>>> + writel(reg, p->membase + BYT_PRV_CLK);
>>> +
>>> + p->status &= ~UPSTAT_AUTOCTS;
>>> + if (termios->c_cflag & CRTSCTS)
>>> + p->status |= UPSTAT_AUTOCTS;
>>> +
>>> + serial8250_do_set_termios(p, termios, old);
>>> +}
>>> +
>>> +/*****************************************************************************/
>>
>> Please remove.
>>
>>> +
>>> +static int byt_serial_setup(struct lpss8250 *lpss, struct uart_port *port)
>>
>> This would have been much easier to review if you had simply moved it here
>> and done the rework in a follow-on patch.
>
> I didn't quite get this one.
Well, just comparing byt_serial_setup() from the two versions:
1) dma setup is in a completely separate function
2) the tx & rx dma parameters are folded together
3) the port setup is split out
4) introduction of struct lpss8250
...
> How series should look like?
I would have just moved byt_serial_setup() without any of the other changes
except perhaps replacing pciserial_board with lpss8250_board, and
then made the other changes on top before the Quark patches.
There is no changelog describing the purpose of struct lpss8250_board, or
struct lpss8250. Or of the dma changes. Or why dma_maxburst was parameterized.
...
Naturally, I can figure all of that out on my own, but it would have been
better to read your reasoning.
It looks alot of work to split out now, so I guess what's done is done, and I'll
just review this *really* carefully. But imagine if you hadn't wrote it, and
were reviewing this: it's very difficult to mentally separate out the changes
and keep track of them while reviewing. Side-by-side diff is nearly useless...
>>
>>
>>> +{
>>> + struct dw_dma_slave *param = &lpss->dma_param;
>>> + struct uart_8250_port *up = up_to_u8250p(port);
>>> + struct pci_dev *pdev = to_pci_dev(port->dev);
>>> + struct pci_dev *dma_dev = pci_get_slot(pdev->bus, PCI_DEVFN(PCI_SLOT(pdev->devfn), 0));
>>> +
>>> + switch (pdev->device) {
>>> + case PCI_DEVICE_ID_INTEL_BYT_UART1:
>>> + case PCI_DEVICE_ID_INTEL_BSW_UART1:
>>> + case PCI_DEVICE_ID_INTEL_BDW_UART1:
>>> + param->src_id = 3;
>>> + param->dst_id = 2;
>>> + break;
>>> + case PCI_DEVICE_ID_INTEL_BYT_UART2:
>>> + case PCI_DEVICE_ID_INTEL_BSW_UART2:
>>> + case PCI_DEVICE_ID_INTEL_BDW_UART2:
>>> + param->src_id = 5;
>>> + param->dst_id = 4;
>>> + break;
>>> + default:
>>> + return -EINVAL;
>>> + }
>>> +
>>> + param->dma_dev = &dma_dev->dev;
>>> + param->m_master = 0;
>>> + param->p_master = 1;
>>> +
>>> + /* TODO: Detect FIFO size automaticaly for DesignWare 8250 */
>>> + port->fifosize = 64;
>>> + up->tx_loadsz = 64;
>>> +
>>> + lpss->dma_maxburst = 16;
>>> +
>>> + port->set_termios = lpss8250_set_termios;
>>> +
>>> + /* Disable TX counter interrupts */
>>> + writel(BYT_TX_OVF_INT_MASK, port->membase + BYT_TX_OVF_INT);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +/*****************************************************************************/
>>
>> Please remove.
>>
>>> +
>>> +static bool lpss8250_dma_filter(struct dma_chan *chan, void *param)
>>> +{
>>> + struct dw_dma_slave *dws = param;
>>> +
>>> + if (dws->dma_dev != chan->device->dev)
>>> + return false;
>>> +
>>> + chan->private = dws;
>>> + return true;
>>> +}
>>> +
>>> +static int lpss8250_dma_setup(struct lpss8250 *lpss, struct uart_8250_port *port)
>>> +{
>>> + struct uart_8250_dma *dma = &lpss->dma;
>>> + struct dw_dma_slave *param = &lpss->dma_param;
>>
>> Unnecessary alias.
>>
>>> + struct dw_dma_slave *rx_param, *tx_param;
>>> + struct device *dev = port->port.dev;
>>> +
>>> + rx_param = devm_kzalloc(dev, sizeof(*rx_param), GFP_KERNEL);
>>> + if (!rx_param)
>>> + return -ENOMEM;
>>> +
>>> + tx_param = devm_kzalloc(dev, sizeof(*tx_param), GFP_KERNEL);
>>> + if (!tx_param)
>>> + return -ENOMEM;
>>> +
>>> + *rx_param = *param;
>>> + dma->rxconf.src_maxburst = lpss->dma_maxburst;
>>> +
>>> + *tx_param = *param;
>>> + dma->txconf.dst_maxburst = lpss->dma_maxburst;
>>> +
>>> + dma->fn = lpss8250_dma_filter;
>>> + dma->rx_param = rx_param;
>>> + dma->tx_param = tx_param;
>>> +
>>> + port->dma = dma;
>>> + return 0;
>>> +}
>>> +
>>> +/*****************************************************************************/
>>
>> Please remove.
>>
>>> +
>>> +static int lpss8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>>> +{
>>> + struct uart_8250_port uart;
>>> + struct lpss8250 *lpss;
>>> + int ret;
>>> +
>>> + ret = pcim_enable_device(pdev);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + pci_set_master(pdev);
>>> +
>>> + lpss = devm_kzalloc(&pdev->dev, sizeof(*lpss), GFP_KERNEL);
>>> + if (!lpss)
>>> + return -ENOMEM;
>>> +
>>> + lpss->board = (struct lpss8250_board *)id->driver_data;
>>> +
>>> + memset(&uart, 0, sizeof(struct uart_8250_port));
>>> +
>>> + uart.port.dev = &pdev->dev;
>>> + uart.port.irq = pdev->irq;
>>> + uart.port.private_data = lpss;
>>> + uart.port.type = PORT_16550A;
>>> + uart.port.iotype = UPIO_MEM32;
>>
>> UPIO_MEM
>>
>>
>>> + uart.port.regshift = 2;
>>> + uart.port.uartclk = lpss->board->base_baud * 16;
>>> + uart.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT | UPF_FIXED_TYPE;
>>> +
>>
>> Please remove empty line
>>
>>> + uart.capabilities = UART_CAP_FIFO | UART_CAP_AFE;
>>> +
>>
>> Same
>>
>>> + uart.port.mapbase = pci_resource_start(pdev, 0);
>>> + uart.port.membase = pcim_iomap(pdev, 0, 0);
>>> + if (!uart.port.membase)
>>> + return -ENOMEM;
>>> +
>>> + if (lpss->board->setup) {
>>
>> There's no design that doesn't have a setup method.
>
> For now, indeed. Okay, I will call it directly.
>
>>
>>
>>> + ret = lpss->board->setup(lpss, &uart.port);
>>> + if (ret)
>>> + return ret;
>>> + }
>>> +
>>> + ret = lpss8250_dma_setup(lpss, &uart);
>>> + if (ret)
>>> + return ret;
>>
>> I would fold this call into board setup which avoids the
>> ugliness when this error pathway is reworked in the
>> follow-on patches.
>
> Each of them?
I'm assuming there's just the two: byt_serial_setup()
and qrk_serial_setup()?
Did I overlook something? Perhaps I missed some design goal?
>>
>>
>>> +
>>> + ret = serial8250_register_8250_port(&uart);
>>> + if (ret < 0)
>>> + return ret;
>>> +
>>> + lpss->line = ret;
>>> +
>>> + pci_set_drvdata(pdev, lpss);
>>> + return 0;
>>> +}
>>> +
>>> +static void lpss8250_remove(struct pci_dev *pdev)
>>> +{
>>> + struct lpss8250 *lpss = pci_get_drvdata(pdev);
>>> +
>>> + serial8250_unregister_port(lpss->line);
>>> +}
>>> +
>>> +static const struct lpss8250_board byt_board = {
>>> + .freq = 100000000,
>>> + .base_baud = 2764800,
>>> + .setup = byt_serial_setup,
>>> +};
>>> +
>>> +#define LPSS_DEVICE(id, board) { PCI_VDEVICE(INTEL, id), (kernel_ulong_t)&board }
>>> +
>>> +static const struct pci_device_id pci_ids[] = {
>>> + LPSS_DEVICE(PCI_DEVICE_ID_INTEL_BYT_UART1, byt_board),
>>> + LPSS_DEVICE(PCI_DEVICE_ID_INTEL_BYT_UART2, byt_board),
>>> + LPSS_DEVICE(PCI_DEVICE_ID_INTEL_BSW_UART1, byt_board),
>>> + LPSS_DEVICE(PCI_DEVICE_ID_INTEL_BSW_UART2, byt_board),
>>> + LPSS_DEVICE(PCI_DEVICE_ID_INTEL_BDW_UART1, byt_board),
>>> + LPSS_DEVICE(PCI_DEVICE_ID_INTEL_BDW_UART2, byt_board),
>>> + { },
>>> +};
>>> +MODULE_DEVICE_TABLE(pci, pci_ids);
>>> +
>>> +static struct pci_driver lpss8250_pci_driver = {
>>> + .name = "8250_lpss",
>>> + .id_table = pci_ids,
>>> + .probe = lpss8250_probe,
>>> + .remove = lpss8250_remove,
>>
>> No power management?
>
> PCI does the trick, no *special* power management treatment required, yes.
I realized that later this am; sorry about that.
[Maybe just put a small note in the changelog about that though?]
Regards,
Peter Hurley
>>
>>
>>> +};
>>> +
>>> +module_pci_driver(lpss8250_pci_driver);
>>> +
>>> +MODULE_AUTHOR("Intel Corporation");
>>> +MODULE_LICENSE("GPL v2");
>>> +MODULE_DESCRIPTION("Intel LPSS UART driver");
>>> diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
>>> index 5eea74d..bb4df5d 100644
>>> --- a/drivers/tty/serial/8250/8250_pci.c
>>> +++ b/drivers/tty/serial/8250/8250_pci.c
>>> @@ -21,14 +21,10 @@
>>> #include <linux/serial_core.h>
>>> #include <linux/8250_pci.h>
>>> #include <linux/bitops.h>
>>> -#include <linux/rational.h>
>>>
>>> #include <asm/byteorder.h>
>>> #include <asm/io.h>
>>>
>>> -#include <linux/dmaengine.h>
>>> -#include <linux/platform_data/dma-dw.h>
>>> -
>>> #include "8250.h"
>>>
>>> /*
>>> @@ -1349,145 +1345,6 @@ ce4100_serial_setup(struct serial_private *priv,
>>> return ret;
>>> }
>>>
>>> -#define PCI_DEVICE_ID_INTEL_BYT_UART1 0x0f0a
>>> -#define PCI_DEVICE_ID_INTEL_BYT_UART2 0x0f0c
>>> -
>>> -#define PCI_DEVICE_ID_INTEL_BSW_UART1 0x228a
>>> -#define PCI_DEVICE_ID_INTEL_BSW_UART2 0x228c
>>> -
>>> -#define PCI_DEVICE_ID_INTEL_BDW_UART1 0x9ce3
>>> -#define PCI_DEVICE_ID_INTEL_BDW_UART2 0x9ce4
>>> -
>>> -#define BYT_PRV_CLK 0x800
>>> -#define BYT_PRV_CLK_EN (1 << 0)
>>> -#define BYT_PRV_CLK_M_VAL_SHIFT 1
>>> -#define BYT_PRV_CLK_N_VAL_SHIFT 16
>>> -#define BYT_PRV_CLK_UPDATE (1 << 31)
>>> -
>>> -#define BYT_TX_OVF_INT 0x820
>>> -#define BYT_TX_OVF_INT_MASK (1 << 1)
>>> -
>>> -static void
>>> -byt_set_termios(struct uart_port *p, struct ktermios *termios,
>>> - struct ktermios *old)
>>> -{
>>> - unsigned int baud = tty_termios_baud_rate(termios);
>>> - unsigned long fref = 100000000, fuart = baud * 16;
>>> - unsigned long w = BIT(15) - 1;
>>> - unsigned long m, n;
>>> - u32 reg;
>>> -
>>> - /* Get Fuart closer to Fref */
>>> - fuart *= rounddown_pow_of_two(fref / fuart);
>>> -
>>> - /*
>>> - * For baud rates 0.5M, 1M, 1.5M, 2M, 2.5M, 3M, 3.5M and 4M the
>>> - * dividers must be adjusted.
>>> - *
>>> - * uartclk = (m / n) * 100 MHz, where m <= n
>>> - */
>>> - rational_best_approximation(fuart, fref, w, w, &m, &n);
>>> - p->uartclk = fuart;
>>> -
>>> - /* Reset the clock */
>>> - reg = (m << BYT_PRV_CLK_M_VAL_SHIFT) | (n << BYT_PRV_CLK_N_VAL_SHIFT);
>>> - writel(reg, p->membase + BYT_PRV_CLK);
>>> - reg |= BYT_PRV_CLK_EN | BYT_PRV_CLK_UPDATE;
>>> - writel(reg, p->membase + BYT_PRV_CLK);
>>> -
>>> - p->status &= ~UPSTAT_AUTOCTS;
>>> - if (termios->c_cflag & CRTSCTS)
>>> - p->status |= UPSTAT_AUTOCTS;
>>> -
>>> - serial8250_do_set_termios(p, termios, old);
>>> -}
>>> -
>>> -static bool byt_dma_filter(struct dma_chan *chan, void *param)
>>> -{
>>> - struct dw_dma_slave *dws = param;
>>> -
>>> - if (dws->dma_dev != chan->device->dev)
>>> - return false;
>>> -
>>> - chan->private = dws;
>>> - return true;
>>> -}
>>> -
>>> -static int
>>> -byt_serial_setup(struct serial_private *priv,
>>> - const struct pciserial_board *board,
>>> - struct uart_8250_port *port, int idx)
>>> -{
>>> - struct pci_dev *pdev = priv->dev;
>>> - struct device *dev = port->port.dev;
>>> - struct uart_8250_dma *dma;
>>> - struct dw_dma_slave *tx_param, *rx_param;
>>> - struct pci_dev *dma_dev;
>>> - int ret;
>>> -
>>> - dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL);
>>> - if (!dma)
>>> - return -ENOMEM;
>>> -
>>> - tx_param = devm_kzalloc(dev, sizeof(*tx_param), GFP_KERNEL);
>>> - if (!tx_param)
>>> - return -ENOMEM;
>>> -
>>> - rx_param = devm_kzalloc(dev, sizeof(*rx_param), GFP_KERNEL);
>>> - if (!rx_param)
>>> - return -ENOMEM;
>>> -
>>> - switch (pdev->device) {
>>> - case PCI_DEVICE_ID_INTEL_BYT_UART1:
>>> - case PCI_DEVICE_ID_INTEL_BSW_UART1:
>>> - case PCI_DEVICE_ID_INTEL_BDW_UART1:
>>> - rx_param->src_id = 3;
>>> - tx_param->dst_id = 2;
>>> - break;
>>> - case PCI_DEVICE_ID_INTEL_BYT_UART2:
>>> - case PCI_DEVICE_ID_INTEL_BSW_UART2:
>>> - case PCI_DEVICE_ID_INTEL_BDW_UART2:
>>> - rx_param->src_id = 5;
>>> - tx_param->dst_id = 4;
>>> - break;
>>> - default:
>>> - return -EINVAL;
>>> - }
>>> -
>>> - rx_param->m_master = 0;
>>> - rx_param->p_master = 1;
>>> -
>>> - dma->rxconf.src_maxburst = 16;
>>> -
>>> - tx_param->m_master = 0;
>>> - tx_param->p_master = 1;
>>> -
>>> - dma->txconf.dst_maxburst = 16;
>>> -
>>> - dma_dev = pci_get_slot(pdev->bus, PCI_DEVFN(PCI_SLOT(pdev->devfn), 0));
>>> - rx_param->dma_dev = &dma_dev->dev;
>>> - tx_param->dma_dev = &dma_dev->dev;
>>> -
>>> - dma->fn = byt_dma_filter;
>>> - dma->rx_param = rx_param;
>>> - dma->tx_param = tx_param;
>>> -
>>> - ret = pci_default_setup(priv, board, port, idx);
>>> - port->port.iotype = UPIO_MEM;
>>> - port->port.type = PORT_16550A;
>>> - port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
>>> - port->port.set_termios = byt_set_termios;
>>> - port->port.fifosize = 64;
>>> - port->tx_loadsz = 64;
>>> - port->dma = dma;
>>> - port->capabilities = UART_CAP_FIFO | UART_CAP_AFE;
>>> -
>>> - /* Disable Tx counter interrupts */
>>> - writel(BYT_TX_OVF_INT_MASK, port->port.membase + BYT_TX_OVF_INT);
>>> -
>>> - return ret;
>>> -}
>>> -
>>> static int
>>> pci_omegapci_setup(struct serial_private *priv,
>>> const struct pciserial_board *board,
>>> @@ -2015,48 +1872,6 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
>>> .subdevice = PCI_ANY_ID,
>>> .setup = kt_serial_setup,
>>> },
>>> - {
>>> - .vendor = PCI_VENDOR_ID_INTEL,
>>> - .device = PCI_DEVICE_ID_INTEL_BYT_UART1,
>>> - .subvendor = PCI_ANY_ID,
>>> - .subdevice = PCI_ANY_ID,
>>> - .setup = byt_serial_setup,
>>> - },
>>> - {
>>> - .vendor = PCI_VENDOR_ID_INTEL,
>>> - .device = PCI_DEVICE_ID_INTEL_BYT_UART2,
>>> - .subvendor = PCI_ANY_ID,
>>> - .subdevice = PCI_ANY_ID,
>>> - .setup = byt_serial_setup,
>>> - },
>>> - {
>>> - .vendor = PCI_VENDOR_ID_INTEL,
>>> - .device = PCI_DEVICE_ID_INTEL_BSW_UART1,
>>> - .subvendor = PCI_ANY_ID,
>>> - .subdevice = PCI_ANY_ID,
>>> - .setup = byt_serial_setup,
>>> - },
>>> - {
>>> - .vendor = PCI_VENDOR_ID_INTEL,
>>> - .device = PCI_DEVICE_ID_INTEL_BSW_UART2,
>>> - .subvendor = PCI_ANY_ID,
>>> - .subdevice = PCI_ANY_ID,
>>> - .setup = byt_serial_setup,
>>> - },
>>> - {
>>> - .vendor = PCI_VENDOR_ID_INTEL,
>>> - .device = PCI_DEVICE_ID_INTEL_BDW_UART1,
>>> - .subvendor = PCI_ANY_ID,
>>> - .subdevice = PCI_ANY_ID,
>>> - .setup = byt_serial_setup,
>>> - },
>>> - {
>>> - .vendor = PCI_VENDOR_ID_INTEL,
>>> - .device = PCI_DEVICE_ID_INTEL_BDW_UART2,
>>> - .subvendor = PCI_ANY_ID,
>>> - .subdevice = PCI_ANY_ID,
>>> - .setup = byt_serial_setup,
>>> - },
>>> /*
>>> * ITE
>>> */
>>> @@ -2921,7 +2736,6 @@ enum pci_board_num_t {
>>> pbn_ADDIDATA_PCIe_4_3906250,
>>> pbn_ADDIDATA_PCIe_8_3906250,
>>> pbn_ce4100_1_115200,
>>> - pbn_byt,
>>> pbn_qrk,
>>> pbn_omegapci,
>>> pbn_NETMOS9900_2s_115200,
>>> @@ -3698,12 +3512,6 @@ static struct pciserial_board pci_boards[] = {
>>> .base_baud = 921600,
>>> .reg_shift = 2,
>>> },
>>> - [pbn_byt] = {
>>> - .flags = FL_BASE0,
>>> - .num_ports = 1,
>>> - .base_baud = 2764800,
>>> - .reg_shift = 2,
>>> - },
>>> [pbn_qrk] = {
>>> .flags = FL_BASE0,
>>> .num_ports = 1,
>>> @@ -3820,6 +3628,14 @@ static const struct pci_device_id blacklist[] = {
>>> { PCI_VDEVICE(INTEL, 0x081d), },
>>> { PCI_VDEVICE(INTEL, 0x1191), },
>>> { PCI_VDEVICE(INTEL, 0x19d8), },
>>> +
>>> + /* Intel platforms with DesignWare UART */
>>> + { PCI_VDEVICE(INTEL, 0x0f0a), },
>>> + { PCI_VDEVICE(INTEL, 0x0f0c), },
>>> + { PCI_VDEVICE(INTEL, 0x228a), },
>>> + { PCI_VDEVICE(INTEL, 0x228c), },
>>> + { PCI_VDEVICE(INTEL, 0x9ce3), },
>>> + { PCI_VDEVICE(INTEL, 0x9ce4), },
>>> };
>>>
>>> /*
>>> @@ -5485,33 +5301,6 @@ static struct pci_device_id serial_pci_tbl[] = {
>>> { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CE4100_UART,
>>> PCI_ANY_ID, PCI_ANY_ID, 0, 0,
>>> pbn_ce4100_1_115200 },
>>> - /* Intel BayTrail */
>>> - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT_UART1,
>>> - PCI_ANY_ID, PCI_ANY_ID,
>>> - PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000,
>>> - pbn_byt },
>>> - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT_UART2,
>>> - PCI_ANY_ID, PCI_ANY_ID,
>>> - PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000,
>>> - pbn_byt },
>>> - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BSW_UART1,
>>> - PCI_ANY_ID, PCI_ANY_ID,
>>> - PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000,
>>> - pbn_byt },
>>> - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BSW_UART2,
>>> - PCI_ANY_ID, PCI_ANY_ID,
>>> - PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000,
>>> - pbn_byt },
>>> -
>>> - /* Intel Broadwell */
>>> - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BDW_UART1,
>>> - PCI_ANY_ID, PCI_ANY_ID,
>>> - PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000,
>>> - pbn_byt },
>>> - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BDW_UART2,
>>> - PCI_ANY_ID, PCI_ANY_ID,
>>> - PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000,
>>> - pbn_byt },
>>>
>>> /*
>>> * Intel Quark x1000
>>> diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
>>> index 64742a0..6fde7d2 100644
>>> --- a/drivers/tty/serial/8250/Kconfig
>>> +++ b/drivers/tty/serial/8250/Kconfig
>>> @@ -108,7 +108,6 @@ config SERIAL_8250_PCI
>>> tristate "8250/16550 PCI device support" if EXPERT
>>> depends on SERIAL_8250 && PCI
>>> default SERIAL_8250
>>> - select RATIONAL
>>> help
>>> This builds standard PCI serial support. You may be able to
>>> disable this feature if you only need legacy serial support.
>>> @@ -398,6 +397,19 @@ config SERIAL_8250_INGENIC
>>> If you have a system using an Ingenic SoC and wish to make use of
>>> its UARTs, say Y to this option. If unsure, say N.
>>>
>>> +config SERIAL_8250_LPSS
>>> + tristate "Support for serial ports on Intel LPSS platforms" if EXPERT
>>> + default SERIAL_8250
>>> + depends on SERIAL_8250 && PCI
>>> + depends on X86 || COMPILE_TEST
>>> + select DW_DMAC_CORE if SERIAL_8250_DMA
>>> + select DW_DMAC_PCI if X86_INTEL_LPSS
>>> + select RATIONAL
>>> + help
>>> + Selecting this option will enable handling of the extra features
>>> + present on the UART found on Intel Braswell SoC and various other
>>> + Intel platforms.
>>> +
>>> config SERIAL_8250_MID
>>> tristate "Support for serial ports on Intel MID platforms"
>>> depends on SERIAL_8250 && PCI
>>> diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
>>> index c9a2d6e..ca37d1c 100644
>>> --- a/drivers/tty/serial/8250/Makefile
>>> +++ b/drivers/tty/serial/8250/Makefile
>>> @@ -28,6 +28,7 @@ obj-$(CONFIG_SERIAL_8250_LPC18XX) += 8250_lpc18xx.o
>>> obj-$(CONFIG_SERIAL_8250_MT6577) += 8250_mtk.o
>>> obj-$(CONFIG_SERIAL_8250_UNIPHIER) += 8250_uniphier.o
>>> obj-$(CONFIG_SERIAL_8250_INGENIC) += 8250_ingenic.o
>>> +obj-$(CONFIG_SERIAL_8250_LPSS) += 8250_lpss.o
>>> obj-$(CONFIG_SERIAL_8250_MID) += 8250_mid.o
>>> obj-$(CONFIG_SERIAL_8250_MOXA) += 8250_moxa.o
>>> obj-$(CONFIG_SERIAL_OF_PLATFORM) += 8250_of.o
>>>
>>
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
