DT maintainers don't like the 'simple-bus' container around the regulator nodes. So remove it. Signed-off-by: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx> --- arch/arm/boot/dts/imx6qdl-tx6.dtsi | 166 +++++++++++++++++-------------------- 1 file changed, 75 insertions(+), 91 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index afc6022..a3e37a7 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -93,104 +93,88 @@ }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_3v3_etn: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "3V3_ETN"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_etnphy_power>; - gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_3v3_etn: regulator-3v3-etn { + compatible = "regulator-fixed"; + regulator-name = "3V3_ETN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_etnphy_power>; + gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - reg_2v5: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "2V5"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; - }; + reg_2v5: regulator-2v5 { + compatible = "regulator-fixed"; + regulator-name = "2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; - reg_3v3: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - reg_can_xcvr: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "CAN XCVR"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan_xcvr>; - gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; - enable-active-low; - }; + reg_can_xcvr: regulator-can-xcvr { + compatible = "regulator-fixed"; + regulator-name = "CAN XCVR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan_xcvr>; + gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; + enable-active-low; + }; - reg_lcd0_pwr: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "LCD0 POWER"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd0_pwr>; - gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-boot-on; - regulator-always-on; - }; + reg_lcd0_pwr: regulator-lcd0-pwr { + compatible = "regulator-fixed"; + regulator-name = "LCD0 POWER"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd0_pwr>; + gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; - reg_lcd1_pwr: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - regulator-name = "LCD1 POWER"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd1_pwr>; - gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-boot-on; - regulator-always-on; - }; + reg_lcd1_pwr: regulator-lcd1-pwr { + compatible = "regulator-fixed"; + regulator-name = "LCD1 POWER"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd1_pwr>; + gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; - reg_usbh1_vbus: regulator@6 { - compatible = "regulator-fixed"; - reg = <6>; - regulator-name = "usbh1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1_vbus>; - gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_usbh1_vbus: regulator-usbh1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usbh1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_vbus>; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - reg_usbotg_vbus: regulator@7 { - compatible = "regulator-fixed"; - reg = <7>; - regulator-name = "usbotg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg_vbus>; - gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_usbotg_vbus: regulator-usbotg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usbotg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_vbus>; + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; }; sound { -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html