Hi Rob, > -----Original Message----- > From: Rob Herring [mailto:robh@xxxxxxxxxx] > Sent: Tuesday, March 29, 2016 2:26 AM > To: Appana Durga Kedareswara Rao > Cc: Soren Brinkmann; pawel.moll@xxxxxxx; mark.rutland@xxxxxxx; > ijc+devicetree@xxxxxxxxxxxxxx; galak@xxxxxxxxxxxxxx; Michal Simek; > vinod.koul@xxxxxxxxx; dan.j.williams@xxxxxxxxx; Anurag Kumar Vulisha; > moritz.fischer@xxxxxxxxx; laurent.pinchart@xxxxxxxxxxxxxxxx; > luis@xxxxxxxxxxxxxxxxx; Srikanth Vemula; Anirudha Sarangi; > devicetree@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux- > kernel@xxxxxxxxxxxxxxx; dmaengine@xxxxxxxxxxxxxxx > Subject: Re: [PATCH v2 5/6] Documentation: DT: vdma: update binding doc for > AXI CDMA > > On Mon, Mar 28, 2016 at 05:27:01AM +0000, Appana Durga Kedareswara Rao > wrote: > > Hi Soren, > > > > > -----Original Message----- > > > From: Sören Brinkmann [mailto:soren.brinkmann@xxxxxxxxxx] > > > Sent: Monday, March 28, 2016 12:58 AM > > > To: Appana Durga Kedareswara Rao > > > Cc: robh+dt@xxxxxxxxxx; pawel.moll@xxxxxxx; mark.rutland@xxxxxxx; > > > ijc+devicetree@xxxxxxxxxxxxxx; galak@xxxxxxxxxxxxxx; Michal Simek; > > > vinod.koul@xxxxxxxxx; dan.j.williams@xxxxxxxxx; Anurag Kumar > > > Vulisha; Appana Durga Kedareswara Rao; moritz.fischer@xxxxxxxxx; > > > laurent.pinchart@xxxxxxxxxxxxxxxx; luis@xxxxxxxxxxxxxxxxx; Srikanth > > > Vemula; Anirudha Sarangi; devicetree@xxxxxxxxxxxxxxx; linux-arm- > > > kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; > > > dmaengine@xxxxxxxxxxxxxxx > > > Subject: Re: [PATCH v2 5/6] Documentation: DT: vdma: update binding > > > doc for AXI CDMA > > > > > > On Sun, 2016-03-27 at 23:36:06 +0530, Kedareswara rao Appana wrote: > > > > This patch updates the device-tree binding doc for adding support > > > > for AXI CDMA. > > > > > > > > Signed-off-by: Kedareswara rao Appana <appanad@xxxxxxxxxx> > > > > --- > > > > ---> Modified commit message as suggested by Vinod. > > > > ---> Moved the patch to forward in the series as suggested by vinod. > > > > > > > > .../devicetree/bindings/dma/xilinx/xilinx_vdma.txt | 18 > > > +++++++++++++++++- > > > > 1 file changed, 17 insertions(+), 1 deletion(-) > > > > > > > > diff --git > > > > a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt > > > > b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt > > > > index 5841421..2b0c12b 100644 > > > > --- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt > > > > +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt > > > > @@ -8,8 +8,12 @@ target devices. It can be configured to have one > > > > channel > > > or two channels. > > > > If configured as two channels, one is to transmit to the device > > > > and another is to receive from the device. > > > > > > > > +Xilinx AXI CDMA engine, it does transfers between memory-mapped > > > > +source address and a memory-mapped destination address. > > > > + > > > > Required properties: > > > > -- compatible: Should be "xlnx,axi-vdma-1.00.a" or "xlnx,axi-dma-1.00.a" > > > > +- compatible: Should be "xlnx,axi-vdma-1.00.a" or "xlnx,axi-dma-1.00.a" > or > > > > + "xlnx,axi-cdma-1.00.a"" > > > > - #dma-cells: Should be <1>, see "dmas" property below > > > > - reg: Should contain VDMA registers location and length. > > > > - xlnx,num-fstores: Should be the number of framebuffers as > > > > configured in > > > h/w. > > > > @@ -80,6 +84,18 @@ axi_dma_0: axidma@40400000 { > > > > } ; > > > > } ; > > > > > > > > +axi_cdma_0: axicdma@7e200000 { > > > > + compatible = "xlnx,axi-cdma-1.00.a"; > > > > + #dma-cells = <1>; > > > > + reg = < 0x7e200000 0x10000 >; > > > > + xlnx,addrwidth = <0x20>; > > > > + dma-channel@7e200000 { > > > > + compatible = "xlnx,axi-dma-mm2s-channel"; > > > > + interrupts = < 0 55 4 >; > > > > + xlnx,datawidth = <0x40>; > > > > + } ; > > > > +} ; > > > > > > As in the other patch, the node name should be 'dma-controller@...' > > > and the inconsistend spacing could be fixed. > > > > Ok will fix... > > > > > > > > Also, it seems this adds pretty much identical examples that just > > > differ in the compat string. Is that really needed? > > > > Most of the properties are same across the three DMA's For AXI VDMA > > there are few required properties that are not required for AXI DMA/CDMA. > > That's why added example for the other IP's as well I mean for AXI DMA and > CDMA. > > It needs to be clear what properties are required/valid for each compatible > string rather than relying on examples. I should be able to write or validate the > examples based on the rest of the text. Ok will fix it in the next version of the patch. Regards, Kedar. > > Rob -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
