This patch updates the device-tree binding doc for
adding support for AXI DMA.
Signed-off-by: Kedareswara rao Appana <appanad@xxxxxxxxxx>
---
.../devicetree/bindings/dma/xilinx/xilinx_vdma.txt | 22 +++++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
index e4c4d47..3d134a5 100644
--- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
+++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
@@ -3,8 +3,13 @@ It can be configured to have one channel or two channels. If configured
as two channels, one is to transmit to the video device and another is
to receive from the video device.
+Xilinx AXI DMA engine, it does transfers between memory and AXI4 stream
+target devices. It can be configured to have one channel or two channels.
+If configured as two channels, one is to transmit to the device and another
+is to receive from the device.
+
Required properties:
-- compatible: Should be "xlnx,axi-vdma-1.00.a"
+- compatible: Should be "xlnx,axi-vdma-1.00.a" or "xlnx,axi-dma-1.00.a"
- #dma-cells: Should be <1>, see "dmas" property below
- reg: Should contain VDMA registers location and length.
- xlnx,num-fstores: Should be the number of framebuffers as configured in h/w.
@@ -55,6 +60,21 @@ axi_vdma_0: axivdma@40030000 {
} ;
} ;
+axi_dma_0: axidma@40400000 {
+ compatible = "xlnx,axi-dma-1.00.a";
+ #dma_cells = <1>;
+ reg = < 0x40400000 0x10000 >;
+ dma-channel@40400000 {
+ compatible = "xlnx,axi-vdma-mm2s-channel";
+ interrupts = < 0 59 4 >;
+ xlnx,datawidth = <0x40>;
+ } ;
+ dma-channel@40400030 {
+ compatible = "xlnx,axi-vdma-s2mm-channel";
+ interrupts = < 0 58 4 >;
+ xlnx,datawidth = <0x40>;
+ } ;
+} ;
* DMA client
--
2.1.2
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
