[PATCHv3 3/3] dmaengine: mv_xor: add suspend/resume support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This commit adds suspend/resume support to the mv_xor driver. The
config and interrupt mask registers must be saved and restored, and
upon resume, the MBus windows configuration must also be done again.

Tested on Armada 388 GP, with a RAID 5 array, accessed before and
after a suspend to RAM cycle.

Based on work from Ofer Heifetz and Lior Amsalem.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
---
 drivers/dma/mv_xor.c | 53 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/dma/mv_xor.h |  1 +
 2 files changed, 54 insertions(+)

diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index a95878c..14091f8 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -1085,6 +1085,57 @@ mv_xor_conf_mbus_windows(struct mv_xor_device *xordev,
 	writel(0, base + WINDOW_OVERRIDE_CTRL(1));
 }
 
+/*
+ * Since this XOR driver is basically used only for RAID5, we don't
+ * need to care about synchronizing ->suspend with DMA activity,
+ * because the DMA engine will naturally be quiet due to the block
+ * devices being suspended.
+ */
+static int mv_xor_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct mv_xor_device *xordev = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < MV_XOR_MAX_CHANNELS; i++) {
+		struct mv_xor_chan *mv_chan = xordev->channels[i];
+
+		if (!mv_chan)
+			continue;
+
+		mv_chan->saved_config_reg =
+			readl_relaxed(XOR_CONFIG(mv_chan));
+		mv_chan->saved_int_mask_reg =
+			readl_relaxed(XOR_INTR_MASK(mv_chan));
+	}
+
+	return 0;
+}
+
+static int mv_xor_resume(struct platform_device *dev)
+{
+	struct mv_xor_device *xordev = platform_get_drvdata(dev);
+	const struct mbus_dram_target_info *dram;
+	int i;
+
+	for (i = 0; i < MV_XOR_MAX_CHANNELS; i++) {
+		struct mv_xor_chan *mv_chan = xordev->channels[i];
+
+		if (!mv_chan)
+			continue;
+
+		writel_relaxed(mv_chan->saved_config_reg,
+			       XOR_CONFIG(mv_chan));
+		writel_relaxed(mv_chan->saved_int_mask_reg,
+			       XOR_INTR_MASK(mv_chan));
+	}
+
+	dram = mv_mbus_dram_info();
+	if (dram)
+		mv_xor_conf_mbus_windows(xordev, dram);
+
+	return 0;
+}
+
 static const struct of_device_id mv_xor_dt_ids[] = {
 	{ .compatible = "marvell,orion-xor", .data = (void *)XOR_MODE_IN_REG },
 	{ .compatible = "marvell,armada-380-xor", .data = (void *)XOR_MODE_IN_DESC },
@@ -1246,6 +1297,8 @@ err_channel_add:
 
 static struct platform_driver mv_xor_driver = {
 	.probe		= mv_xor_probe,
+	.suspend        = mv_xor_suspend,
+	.resume         = mv_xor_resume,
 	.driver		= {
 		.name	        = MV_XOR_NAME,
 		.of_match_table = of_match_ptr(mv_xor_dt_ids),
diff --git a/drivers/dma/mv_xor.h b/drivers/dma/mv_xor.h
index 3438914..c19fe30 100644
--- a/drivers/dma/mv_xor.h
+++ b/drivers/dma/mv_xor.h
@@ -125,6 +125,7 @@ struct mv_xor_chan {
 	char			dummy_src[MV_XOR_MIN_BYTE_COUNT];
 	char			dummy_dst[MV_XOR_MIN_BYTE_COUNT];
 	dma_addr_t		dummy_src_addr, dummy_dst_addr;
+	u32                     saved_config_reg, saved_int_mask_reg;
 };
 
 /**
-- 
2.6.4

--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux