[PATCH 7/9] Serial:8250: New Port Type PORT_AMD_8250

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Set a new port type for AMD Carrizo.  Add has_pl330_dma to 8250_dw's
private data and init fcr,ier as well as dma rx size.

Signed-off-by: Wang Hongcheng <annie.wang@xxxxxxx>
---
 drivers/acpi/acpi_apd.c             | 10 ++++++++++
 drivers/tty/serial/8250/8250_dw.c   | 16 ++++++++++++++++
 drivers/tty/serial/8250/8250_port.c |  9 +++++++++
 include/linux/serial_8250.h         |  4 ++++
 include/uapi/linux/serial_core.h    |  3 ++-
 include/uapi/linux/serial_reg.h     |  2 ++
 6 files changed, 43 insertions(+), 1 deletion(-)

diff --git a/drivers/acpi/acpi_apd.c b/drivers/acpi/acpi_apd.c
index 906a20f..787f477 100644
--- a/drivers/acpi/acpi_apd.c
+++ b/drivers/acpi/acpi_apd.c
@@ -23,6 +23,7 @@
 #include <linux/sizes.h>
 #include <linux/amba/pl330.h>
 #include <linux/interrupt.h>
+#include <linux/serial_8250.h>
 
 #include "internal.h"
 
@@ -49,6 +50,10 @@ static struct dma_pl330_platdata amd_pl330 = {
 	.acpi_xlate_filter = apd_acpi_xlate_filter,
 };
 
+static struct plat_dw8250_data amd_dw8250 = {
+	.has_pl330_dma = 1,
+};
+
 /**
  * struct apd_device_desc - a descriptor for apd device.
  * @flags: device flags like %ACPI_APD_SYSFS, %ACPI_APD_PM;
@@ -164,6 +169,11 @@ static int acpi_apd_create_device(struct acpi_device *adev,
 		goto err_out;
 
 	if (!strncmp(pdev->name, "AMD0020", 7)) {
+		ret = platform_device_add_data(pdev, &amd_dw8250,
+					       sizeof(amd_dw8250));
+		if (ret)
+			goto err_out;
+
 		memset(&amba_quirks, 0, sizeof(amba_quirks));
 		setup_quirks(pdev, &amba_quirks);
 
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index a5d319e..a5ae9b6 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -66,6 +66,8 @@ struct dw8250_data {
 
 	unsigned int		skip_autocfg:1;
 	unsigned int		uart_16550_compatible:1;
+
+	unsigned		has_pl330_dma:1;
 };
 
 #define BYT_PRV_CLK			0x800
@@ -304,6 +306,7 @@ static void dw8250_setup_port(struct uart_port *p)
 {
 	struct uart_8250_port *up = up_to_u8250p(p);
 	u32 reg;
+	struct dw8250_data *d = p->private_data;
 
 	/*
 	 * If the Component Version Register returns zero, we know that
@@ -326,6 +329,16 @@ static void dw8250_setup_port(struct uart_port *p)
 		p->flags |= UPF_FIXED_TYPE;
 		p->fifosize = DW_UART_CPR_FIFO_SIZE(reg);
 		up->capabilities = UART_CAP_FIFO;
+		if (d->has_pl330_dma) {
+			p->type = PORT_AMD_8250;
+			p->flags |= UPF_SHARE_IRQ;
+
+			up->ier |= UART_IER_PTIME | UART_IER_THRI |
+				UART_IER_RLSI | UART_IER_RDI;
+			up->fcr |= UART_FCR_R_TRIG_10 | UART_FCR_T_TRIG_11 |
+				UART_FCR_DMA_SELECT;
+			up->tx_loadsz = p->fifosize / 2;
+		}
 	}
 
 	if (reg & DW_UART_CPR_AFCE_MODE)
@@ -339,6 +352,7 @@ static int dw8250_probe(struct platform_device *pdev)
 	int irq = platform_get_irq(pdev, 0);
 	struct uart_port *p = &uart.port;
 	struct dw8250_data *data;
+	struct plat_dw8250_data *pdata = dev_get_platdata(&pdev->dev);
 	int err;
 	u32 val;
 
@@ -468,6 +482,7 @@ static int dw8250_probe(struct platform_device *pdev)
 		p->handle_irq = NULL;
 	}
 
+	data->has_pl330_dma = pdata ? pdata->has_pl330_dma : 0;
 	if (!data->skip_autocfg)
 		dw8250_setup_port(p);
 
@@ -475,6 +490,7 @@ static int dw8250_probe(struct platform_device *pdev)
 	if (p->fifosize) {
 		data->dma.rxconf.src_maxburst = p->fifosize / 4;
 		data->dma.txconf.dst_maxburst = p->fifosize / 4;
+		data->dma.rx_size = data->has_pl330_dma ? (p->fifosize / 2 + 2) : 0;
 		uart.dma = &data->dma;
 	}
 
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 52d82d2..b258edc 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -269,6 +269,15 @@ configured less than Maximum supported fifo bytes */
 		.rxtrig_bytes	= {1, 4, 8, 14},
 		.flags		= UART_CAP_FIFO,
 	},
+	[PORT_AMD_8250] = {
+		.name		= "AMD_8250",
+		.fifo_size	= 256,
+		.tx_loadsz	= 128,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 |
+				UART_FCR_T_TRIG_11 | UART_FCR_DMA_SELECT,
+		.rxtrig_bytes	= {1, 4, 8},
+		.flags		= UART_CAP_FIFO,
+	},
 };
 
 /* Uart divisor latch read */
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index faa0e03..4652783 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -42,6 +42,10 @@ struct plat_serial8250_port {
 	void		(*handle_break)(struct uart_port *);
 };
 
+struct plat_dw8250_data {
+	unsigned has_pl330_dma:1;
+};
+
 /*
  * Allocate 8250 platform device IDs.  Nothing is implied by
  * the numbering here, except for the legacy entry being -1.
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index 93ba148..6a06651 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -56,7 +56,8 @@
 #define PORT_ALTR_16550_F128 28 /* Altera 16550 UART with 128 FIFOs */
 #define PORT_RT2880	29	/* Ralink RT2880 internal UART */
 #define PORT_16550A_FSL64 30	/* Freescale 16550 UART with 64 FIFOs */
-#define PORT_MAX_8250	30	/* max port ID */
+#define PORT_AMD_8250  31
+#define PORT_MAX_8250	32	/* max port ID */
 
 /*
  * ARM specific type numbers.  These are not currently guaranteed
diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h
index 1e5ac4e7..13e8294 100644
--- a/include/uapi/linux/serial_reg.h
+++ b/include/uapi/linux/serial_reg.h
@@ -25,6 +25,8 @@
 #define UART_IER_RLSI		0x04 /* Enable receiver line status interrupt */
 #define UART_IER_THRI		0x02 /* Enable Transmitter holding register int. */
 #define UART_IER_RDI		0x01 /* Enable receiver data interrupt */
+/* Enable Programmable Transmitter holding register int. */
+#define UART_IER_PTIME          0x80
 /*
  * Sleep mode for ST16650 and TI16750.  For the ST16650, EFR[4]=1
  */
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux