Vinod, On 10/29/2015 10:28 AM, Peter Ujfalusi wrote: > Hi, > > This series depends on the eDMA work I have done, which has been now applied: > https://lkml.org/lkml/2015/10/16/64 > > DRA7 family of chips have both sDMA and eDMA. Currently only sDMA can be used > becasue the old driver stack for eDMA did not allowed integration w/o hacks. > > Due to the nature of eDMA the crossbar needs to know which eDMA events it can > use to map incoming events towards the eDMA. In eDMA a channel is wired to be > used with one specific event. For example eDMA event 14 can only be handled by > eDMA channel 14. > The eDMA itself can be shared by different processors in the system (ARM, DSP, > etc) and since ARM/Linux is the master we need to know which channels are used > by other cores. Also we need to mask out channels used for memcpy from the > events we use for HW triggers. Please ignore this series, I have found some issue with it and I just started to debug it. Will post V2 as soon as I found the problem. > > Regards, > Peter > --- > Peter Ujfalusi (3): > dmaengine: ti-dma-crossbar: dra7: Use bitops instead of idr > dmaengine: ti-dma-crossbar: dra7: Support for reserving DMA event > ranges > dmaengine: ti-dma-crossbar: dra7: Support for eDMA with new bindings > > .../devicetree/bindings/dma/ti-dma-crossbar.txt | 6 ++ > drivers/dma/ti-dma-crossbar.c | 81 +++++++++++++++++++--- > 2 files changed, 76 insertions(+), 11 deletions(-) > -- Péter -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
