Re: [PATCH v3 2/3] powerpc/512x: add a device tree binding for LocalPlus Bus FIFO

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 28.09.2015 16:26, Timur Tabi wrote:
> Alexander Popov wrote:
>> I've just followed devicetree/bindings/dma/dma.txt...
>> This "rx-tx" doesn't mean much but it could show that LocalPlus Bus FIFO
>> uses a single DMA read-write channel. Should I really drop it?
> 
> Hmmm, I'm not sure.  Is there anything else (besides your driver) that
> parses this device tree node?

No, mpc512x_lpbfifo.c is the only piece of code which is going to use this
device tree node.

> dma.txt says this:
> 
>     "The specific strings that can be used are defined in the binding of the
> DMA client device."
> 
> So this looks like it's driver-specific,

Yes.
MPC512x LocalPlus Bus FIFO uses the channel #26 of the DMA controller
both for reading and writing, and other DMA clients use other specific
DMA channels. This channel assignment is fixed in hardware and described
in the Reference Manual.

> but it is a required property.
> I guess you should keep it, but I think you should get a second opinion.

Ok, thanks.

Best regards,
Alexander
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux