In case we have less than maximum allowed channels (8) and autoconfiguration is
enabled the DWC_PARAMS read is wrong because it uses different arithmetic to
what is needed for channel priority setup.
Re-do the caclulations properly. This now works on AVR32 board well.
Fixes: fed2574b3c9f (dw_dmac: introduce software emulation of LLP transfers)
Cc: yitian.bu@xxxxxxxxxxxxxx
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
drivers/dma/dw/core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c
index cf1c87f..bedce03 100644
--- a/drivers/dma/dw/core.c
+++ b/drivers/dma/dw/core.c
@@ -1591,7 +1591,6 @@ int dw_dma_probe(struct dw_dma_chip *chip, struct dw_dma_platform_data *pdata)
INIT_LIST_HEAD(&dw->dma.channels);
for (i = 0; i < nr_channels; i++) {
struct dw_dma_chan *dwc = &dw->chan[i];
- int r = nr_channels - i - 1;
dwc->chan.device = &dw->dma;
dma_cookie_init(&dwc->chan);
@@ -1603,7 +1602,7 @@ int dw_dma_probe(struct dw_dma_chip *chip, struct dw_dma_platform_data *pdata)
/* 7 is highest priority & 0 is lowest. */
if (pdata->chan_priority == CHAN_PRIORITY_ASCENDING)
- dwc->priority = r;
+ dwc->priority = nr_channels - i - 1;
else
dwc->priority = i;
@@ -1622,6 +1621,7 @@ int dw_dma_probe(struct dw_dma_chip *chip, struct dw_dma_platform_data *pdata)
/* Hardware configuration */
if (autocfg) {
unsigned int dwc_params;
+ unsigned int r = DW_DMA_MAX_NR_CHANNELS - i - 1;
void __iomem *addr = chip->regs + r * sizeof(u32);
dwc_params = dma_read_byaddr(addr, DWC_PARAMS);
--
2.5.1
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
