Re: [PATCH 3/3] dmaengine: tegra-adma: Add support for Tegra210 ADMA

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Friday 25 September 2015 15:56:40 Jon Hunter wrote:
> +       case DMA_MEM_TO_DEV:
> +               burst_size = fls(tdc->config.dst_maxburst);
> +               ch_regs->config = ADMA_CH_CONFIG_SRC_BUF(num_bufs - 1);
> +               ch_regs->ctrl = ADMA_CH_CTRL_XFER_DIR(ADMA_MEM_TO_AHUB) |
> +                               ADMA_CH_CTRL_TX_REQ(tdc->config.slave_id);
> +               ch_regs->src_addr = buf_addr;
> +               break;
> +
> +       case DMA_DEV_TO_MEM:
> +               burst_size = fls(tdc->config.src_maxburst);
> +               ch_regs->config = ADMA_CH_CONFIG_TRG_BUF(num_bufs - 1);
> +               ch_regs->ctrl = ADMA_CH_CTRL_XFER_DIR(ADMA_AHUB_TO_MEM) |
> +                               ADMA_CH_CTRL_RX_REQ(tdc->config.slave_id);
> +               ch_regs->trg_addr = buf_addr;
> +               break;

Do not use the 'slave_id' field here to identify the slave device, that
concept is broken. Instead, put the slave identification into the
dma specifier in DT and read it out in your xlate function.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux