On Thu, Aug 27, 2015 at 09:19:18PM +0530, Anurag Kumar Vulisha wrote: > This VDMA is a soft ip, which can be programmed to support > 32 bit addressing or greater than 32 bit addressing. > > When the VDMA ip is configured for 32 bit address space the > transfer start address is specified by a single register. would be good to specfiy which one > When the VDMA core is configured for an address space greater > than 32 then each start address is specified by a combination > of two registers. The first register specifies the LSB 32 bits > of address, while the next register specifies the MSB 32 bits > of address.For example,5Ch will specify the LSB 32 bits while > 60h will specify the MSB 32 bits of the first start address.So > we need to program two registers at a time. can we have spaces after full stops and commas! > +/* Since vdma driver is trying to write to a register offset which is not a > + * multiple of 64 bits(ex : 0x5c), we are writing as two separate 32 bits > + * instead of a single 64 bit register write. > + */ This is not kernel style for multi-lines, pls refer to Documentation/CodingStyle > + > +static inline void vdma_desc_write_64(struct xilinx_vdma_chan *chan, u32 reg, > + u32 value_lsb, u32 value_msb) > +{ > + /* Write the lsb 32 bits*/ > + writel(value_lsb, chan->xdev->regs + chan->desc_offset + reg); > + > + /* Write the msb 32 bits */ > + writel(value_msb, chan->xdev->regs + chan->desc_offset + reg + 4); why not writeq > + err = of_property_read_u32(node, "xlnx,addrwidth", &addr_width); > + > + if (err < 0) { > + /* Setting addr_width property to default 32 bits */ > + addr_width = 32; > + } braces for a single line statement! Also space is redandant before if condition -- ~Vinod -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html