[PATCH 1/5] DMA: pl330: support burst mode for dev-to-mem and mem-to-dev transmit

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch adds to support burst mode for dev-to-mem and
mem-to-dev transmit.

Signed-off-by: Boojin Kim <boojin.kim@xxxxxxxxxxx>
Signed-off-by: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
cc: Heiko Stuebner <heiko@xxxxxxxxx>
cc: Doug Anderson <dianders@xxxxxxxxxxxx>
cc: Olof Johansson <olofj@xxxxxxxxxx>
Reviewed-and-tested-by: Sonny Rao <sonnyrao@xxxxxxxxxxxx>

---

 drivers/dma/pl330.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index ecab4ea0..0d544d2 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -1141,10 +1141,13 @@ static inline int _ldst_devtomem(unsigned dry_run, u8 buf[],
 		const struct _xfer_spec *pxs, int cyc)
 {
 	int off = 0;
+	enum pl330_cond cond;
+
+	cond = (pxs->desc->rqcfg.brst_len == 1) ? SINGLE : BURST;
 
 	while (cyc--) {
-		off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->desc->peri);
-		off += _emit_LDP(dry_run, &buf[off], SINGLE, pxs->desc->peri);
+		off += _emit_WFP(dry_run, &buf[off], cond, pxs->desc->peri);
+		off += _emit_LDP(dry_run, &buf[off], cond, pxs->desc->peri);
 		off += _emit_ST(dry_run, &buf[off], ALWAYS);
 		off += _emit_FLUSHP(dry_run, &buf[off], pxs->desc->peri);
 	}
@@ -1156,11 +1159,14 @@ static inline int _ldst_memtodev(unsigned dry_run, u8 buf[],
 		const struct _xfer_spec *pxs, int cyc)
 {
 	int off = 0;
+	enum pl330_cond cond;
+
+	cond = (pxs->desc->rqcfg.brst_len == 1) ? SINGLE : BURST;
 
 	while (cyc--) {
-		off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->desc->peri);
+		off += _emit_WFP(dry_run, &buf[off], cond, pxs->desc->peri);
 		off += _emit_LD(dry_run, &buf[off], ALWAYS);
-		off += _emit_STP(dry_run, &buf[off], SINGLE, pxs->desc->peri);
+		off += _emit_STP(dry_run, &buf[off], cond, pxs->desc->peri);
 		off += _emit_FLUSHP(dry_run, &buf[off], pxs->desc->peri);
 	}
 
@@ -2557,7 +2563,7 @@ static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
 
 		desc->rqtype = direction;
 		desc->rqcfg.brst_size = pch->burst_sz;
-		desc->rqcfg.brst_len = 1;
+		desc->rqcfg.brst_len = pch->burst_len;
 		desc->bytes_requested = period_len;
 		fill_px(&desc->px, dst, src, period_len);
 
@@ -2702,7 +2708,7 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
 		}
 
 		desc->rqcfg.brst_size = pch->burst_sz;
-		desc->rqcfg.brst_len = 1;
+		desc->rqcfg.brst_len = pch->burst_len;
 		desc->rqtype = direction;
 		desc->bytes_requested = sg_dma_len(sg);
 	}
-- 
2.3.7


--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux