On 23/08/15 15:33, Vinod Koul wrote:
> On Tue, Aug 18, 2015 at 02:49:15PM +0100, Jon Hunter wrote:
>> +#define AHUB_TO_MEMORY 2
>> +#define MEMORY_TO_AHUB 4
>
> namespace this aptly as well
>
>> +static void tegra_adma_stop(struct tegra_dma_channel *tdc)
>> +{
>> + u32 status;
>> +
>> + /* TODO: Do we need to disable interrupts here? */
>
> when?
Once everyone is happy with the RFC in general.
>> +static void tegra_adma_start(struct tegra_dma_channel *tdc,
>> + struct tegra_dma_sg_req *sg_req)
>> +{
>> + struct tegra_adma_chan_regs *ch_regs = &sg_req->adma_ch_regs;
>> +
>> + /* Update transfer done count for position calculation */
>> + tdc->adma_ch_regs.tc = ch_regs->tc;
>> + tdc_write(tdc, ADMA_CH_TC, ch_regs->tc);
>> + tdc_write(tdc, ADMA_CH_CTRL, ch_regs->ctrl);
>> + tdc_write(tdc, ADMA_CH_LOWER_SOURCE_ADDR, ch_regs->src_ptr);
>> + tdc_write(tdc, ADMA_CH_LOWER_TARGET_ADDR, ch_regs->tgt_ptr);
>> + tdc_write(tdc, ADMA_CH_AHUB_FIFO_CTRL, ch_regs->ahub_fifo_ctrl);
>> + tdc_write(tdc, ADMA_CH_CONFIG, ch_regs->config);
> empty line here please
Ok.
>> +static int tegra_adma_get_xfer_params(struct tegra_dma_channel *tdc,
>> + struct tegra_adma_chan_regs *ch_regs,
>> + enum dma_transfer_direction direction)
>> +{
>> + u32 burst_size, ctrl, ctrl_mask, slave_id, fifo_mask, fifo_shift;
>> +
>> + ch_regs->ahub_fifo_ctrl = tdc_read(tdc, ADMA_CH_AHUB_FIFO_CTRL);
>> + ch_regs->config = tdc_read(tdc, ADMA_CH_CONFIG);
>> + ch_regs->ctrl = tdc_read(tdc, ADMA_CH_CTRL);
>> + slave_id = tdc->dma_sconfig.slave_id;
>> +
>> + switch (direction) {
>> + case DMA_MEM_TO_DEV:
>> + burst_size = fls(tdc->dma_sconfig.dst_maxburst);
>> + ctrl_mask = ADMA_CH_CTRL_TX_REQUEST_SELECT_MASK;
>> + ctrl = MEMORY_TO_AHUB << ADMA_CH_CTRL_TRANSFER_DIRECTION_SHIFT;
>> + ctrl |= slave_id << ADMA_CH_CTRL_TX_REQUEST_SELECT_SHIFT;
>> + fifo_mask = ADMA_CH_AHUB_FIFO_CTRL_TX_FIFO_SIZE_MASK;
>> + fifo_shift = ADMA_CH_AHUB_FIFO_CTRL_TX_FIFO_SIZE_SHIFT;
>> + break;
> Empty line here pls
Ok, any reason why? Other dma drivers don't appear to do this.
>> + case DMA_DEV_TO_MEM:
>> + burst_size = fls(tdc->dma_sconfig.src_maxburst);
>> + ctrl_mask = ADMA_CH_CTRL_RX_REQUEST_SELECT_MASK;
>> + ctrl = AHUB_TO_MEMORY << ADMA_CH_CTRL_TRANSFER_DIRECTION_SHIFT;
>> + ctrl |= slave_id << ADMA_CH_CTRL_RX_REQUEST_SELECT_SHIFT;
>> + fifo_mask = ADMA_CH_AHUB_FIFO_CTRL_RX_FIFO_SIZE_MASK;
>> + fifo_shift = ADMA_CH_AHUB_FIFO_CTRL_RX_FIFO_SIZE_SHIFT;
>> + break;
>
> here too...
>
>> + default:
>> + dev_err(tdc2dev(tdc), "Dma direction is not supported\n");
>> + return -EINVAL;
>> + }
>> +
>> + if (!burst_size || burst_size > ADMA_BURSTSIZE_16)
>> + burst_size = ADMA_BURSTSIZE_16;
>> +
>> + ch_regs->ahub_fifo_ctrl &= ~fifo_mask;
>> + ch_regs->ahub_fifo_ctrl |= ADMA_FIFO_DEFAULT_SIZE << fifo_shift;
>> + ch_regs->config &= ~ADMA_CH_CONFIG_BURST_SIZE_MASK;
>> + ch_regs->config |= burst_size << ADMA_CH_CONFIG_BURST_SIZE_SHIFT;
>> + ch_regs->ctrl &= ~(ctrl_mask | ADMA_CH_CTRL_TRANSFER_DIRECTION_MASK);
>> + ch_regs->ctrl |= ctrl;
>> +
>> + return -EINVAL;
> ??
Thanks. That's an error. Will fix.
>> +static int tegra_adma_pm_suspend(struct device *dev)
>> +{
>> + struct tegra_dma *tdma = dev_get_drvdata(dev);
>> + int i;
>> + int ret;
>> +
>> + ret = pm_runtime_get_sync(dev);
> why is this required :)
To ensure that the clocks are enabled before the registers are read.
This function saves the dma context before suspend, in case the hardware
state is lost.
>> +static int tegra_adma_pm_resume(struct device *dev)
>> +{
>> + struct tegra_dma *tdma = dev_get_drvdata(dev);
>> + int i;
>> + int ret;
>> +
>> + ret = pm_runtime_get_sync(dev);
> and this
Same here.
Cheers
Jon
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
