On Tue, Jul 28, 2015 at 11:38:06AM +0200, Lars-Peter Clausen wrote:
> +static void axi_dmac_start_transfer(struct axi_dmac_chan *chan)
> +{
> + struct axi_dmac *dmac = chan_to_axi_dmac(chan);
> + struct virt_dma_desc *vdesc;
> + struct axi_dmac_desc *desc;
> + struct axi_dmac_sg *sg;
> + unsigned int flags = 0;
> + unsigned int val;
> +
> + val = axi_dmac_read(dmac, AXI_DMAC_REG_START_TRANSFER);
> + if (val) /* Queue is full, wait for the next SOT IRQ */
> + return;
> +
> + desc = chan->next_desc;
> +
> + if (!desc) {
> + vdesc = vchan_next_desc(&chan->vchan);
> + if (!vdesc)
> + return;
> + list_move_tail(&vdesc->node, &chan->active_descs);
> + desc = to_axi_dmac_desc(vdesc);
> + }
> + sg = &desc->sg[desc->num_submitted];
> +
> + desc->num_submitted++;
> + if (desc->num_submitted == desc->num_sgs)
> + chan->next_desc = NULL;
> + else
> + chan->next_desc = desc;
> +
> + sg->id = axi_dmac_read(dmac, AXI_DMAC_REG_TRANSFER_ID);
> +
> + if (axi_dmac_dest_is_mem(chan)) {
> + axi_dmac_write(dmac, AXI_DMAC_REG_DEST_ADDRESS, sg->dest_addr);
> + axi_dmac_write(dmac, AXI_DMAC_REG_DEST_STRIDE, sg->dest_stride);
> + }
> +
> + if (axi_dmac_src_is_mem(chan)) {
> + axi_dmac_write(dmac, AXI_DMAC_REG_SRC_ADDRESS, sg->src_addr);
> + axi_dmac_write(dmac, AXI_DMAC_REG_SRC_STRIDE, sg->src_stride);
> + }
> +
> + /*
> + * If the hardware supports cyclic transfers and there is no callback to
> + * call, enable hw cyclic mode to avoid unnecessary interrupts.
> + */
> + if (chan->hw_cyclic && desc->cyclic && !desc->vdesc.tx.callback)
> + flags |= AXI_DMAC_FLAG_CYCLIC;
> +
> + axi_dmac_write(dmac, AXI_DMAC_REG_X_LENGTH, sg->x_len - 1);
> + axi_dmac_write(dmac, AXI_DMAC_REG_Y_LENGTH, sg->y_len - 1);
> + axi_dmac_write(dmac, AXI_DMAC_REG_FLAGS, flags);
> + axi_dmac_write(dmac, AXI_DMAC_REG_START_TRANSFER, 1);
> +}
On Wed, Aug 19, 2015 at 06:55:34PM +0200, Lars-Peter Clausen wrote:
> On 08/19/2015 06:32 PM, Vinod Koul wrote:
> > On Tue, Jul 28, 2015 at 11:38:06AM +0200, Lars-Peter Clausen wrote:
> >> + desc = axi_dmac_alloc_desc(sg_len);
> >> + if (!desc)
> >> + return NULL;
> >> +
> >> + for_each_sg(sgl, sg, sg_len, i) {
> >> + if (!axi_dmac_check_addr(chan, sg_dma_address(sg)) ||
> >> + !axi_dmac_check_len(chan, sg_dma_len(sg))) {
> >> + kfree(desc);
> >> + return NULL;
> >> + }
> >> +
> >> + if (direction == DMA_DEV_TO_MEM)
> >> + desc->sg[i].dest_addr = sg_dma_address(sg);
> >> + else
> >> + desc->sg[i].src_addr = sg_dma_address(sg);
> > where is device side programming ?
>
> in the start_transfer() function.
I must have missed that but still don't see it here, can you point me
--
~Vinod
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
