Re: [PATCH] dma: omap-dma: add support for pause of non-cyclic transfers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Aug 07, 2015 at 01:23:20PM -0400, Peter Hurley wrote:
> The omap-serial driver which doesn't use dma is still the preferred
> stable driver for omap, for the moment.
> 
> One of the main features of the 8250_omap integration was the addition
> of dma support. Without it, 8250_omap is ttyO in ttyS clothing.

Correct.  omap-serial used to have broken DMA support, and I had a
series of patches fixing it.  Unfortunately, despite TI asking me to
work on this, TI went ahead and removed the DMA support behind my
back, which totally screwed my patch series after I merged some of
its pre-requists.  It was then decided that DMA support was no longer
an important feature, so I dropped the patch set.

So, I'm well aware of the issues here, and the problems of using the
OMAP sDMA with the UARTs.

-- 
FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up
according to speedtest.net.
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux