On Wed, 2015-07-22 at 10:27 +0530, Vinod Koul wrote: > On Tue, Jul 21, 2015 at 10:08:28AM +0300, Andy Shevchenko wrote: > > On Tue, Jul 21, 2015 at 7:50 AM, Vinod Koul <vinod.koul@xxxxxxxxx> > > wrote: > > > On Mon, Jul 20, 2015 at 11:46:28AM +0300, Andy Shevchenko wrote: > > > > > > +static void idma64_chan_init(struct idma64 *idma64, struct > > > > > > idma64_chan *idma64c) > > > > > > +{ > > > > > > + u32 cfghi = IDMA64C_CFGH_SRC_PER(1) | > > > > > > IDMA64C_CFGH_DST_PER(0); > > > > > > + u32 cfglo = 0; > > > > > > + > > > > > > + /* Enforce FIFO drain when channel is suspended */ > > > > > > + cfglo |= IDMA64C_CFGL_CH_DRAIN; > > > > > > + > > > > > > + /* Set default burst alignment */ > > > > > > + cfglo |= IDMA64C_CFGL_DST_BURST_ALIGN | > > > > > > IDMA64C_CFGL_SRC_BURST_ALIGN; > > > > > > + > > > > > > + channel_writel(idma64c, CFG_LO, cfglo); > > > > > > + channel_writel(idma64c, CFG_HI, cfghi); > > > > > > + > > > > > > + /* Enable interrupts */ > > > > > > + channel_set_bit(idma64, MASK(XFER), idma64c->mask); > > > > > > + channel_set_bit(idma64, MASK(ERROR), idma64c->mask); > > > > > > + > > > > > > + /* > > > > > > + * Enforce the controller to be turned on. > > > > > > + * > > > > > > + * The iDMA is turned off in ->probe() and looses > > > > > > context during system > > > > > > + * suspend / resume cycle. That's why we have to > > > > > > enable it each time we > > > > > > + * use it. > > > > > > + */ > > > > > > + idma64_on(idma64); > > > > > would it be better that you do this in resume and > > > > > runtime_resume cycle. That > > > > > way it need not be called for every channel init > > > > > > > > Mika, I don't remember details here, but this piece came from > > > > you. Can > > > > you shed a light? > > > > > > > > My understanding that DMA IP is private to the host controller > > > > and has > > > > the same power rail. Thus, there is no need to do separate > > > > power > > > > management for it, which makes things more complicated for no > > > > profit. > > > > It is also needed for time period from probe till first > > > > transfer > > > > (otherwise we have to check the status of DMA anyway and enable > > > > it if > > > > required), which currently remains DMA off. > > > so who does runtime management of this power rail and whosoever > > > does that > > > how do they ensure the dma is not active at that time? > > > > The host controller driver knows this and it makes it so. > > Anyway, even if we introduce PM callbacks in this driver how to > > solve > > the issue to run very first transfer in a neat way? > > And how does it know? It should not start any transfer when system goes suspend (and terminates on going ones). It might be that not all drivers currently implement the described work flow. > > In PM callback case, your runtime resume should enable the controller PM runtime is an overkill here because it's not exactly turning power rail off on the device, though reference counting would makes sense. > > > > > > > +static int idma64_terminate_all(struct dma_chan *chan) > > > > > > +{ > > > > > > + struct idma64_chan *idma64c = to_idma64_chan(chan); > > > > > > + unsigned long flags; > > > > > > + LIST_HEAD(head); > > > > > > + > > > > > > + spin_lock_irqsave(&idma64c->vchan.lock, flags); > > > > > > + idma64_stop_transfer(idma64c); > > > > > I dont think this is the right method for terminate. Can you > > > > > check, it > > > > > might be that we have to suspend the channel before > > > > > terminating an active > > > > > one. For non active case this should be okay > > > > > > > > Do you mean hardware can become into wrong state? > > > Yes at least that was true for 32bit version of this IP > > > > Can you elaborate what exactly is happening? We can do a test then > > and > > check. For now on we experienced no problems. > > While you are doing transfers, try terminating. After that doesnt > next > transaction on same channel work well, if not then please try > suspending > first before terminating I will think how to test this. Meanwhile do you think it's a show stopper for driver right now? > > > > > Only what can actually happen is the data loss which is in DMA > > > > FIFO, > > > > but we already know we would like to terminate the transfer we > > > > don't > > > > care about any data loss since that. > > > The terminate flow expect you to suspend the channel first and > > > then terminate > > > > Hm... I didn't see anything in the specification. Can you point out > > where it's described? > > I dont have specs to point, but we did see this issue on 32bit BYT > iDMA and designer told us to follow this flow -- Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> Intel Finland Oy -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html