On Thu, Jul 16, 2015 at 6:05 PM, Vinod Koul <vinod.koul@xxxxxxxxx> wrote:
> On Tue, Jun 16, 2015 at 08:04:43AM +0530, Punnaiah Choudary Kalluri wrote:
>> +/* Register Offsets */
>> +#define ISR 0x100
>> +#define IMR 0x104
>> +#define IER 0x108
>> +#define IDS 0x10C
>> +#define CTRL0 0x110
>> +#define CTRL1 0x114
>> +#define STATUS 0x11C
>> +#define DATA_ATTR 0x120
>> +#define DSCR_ATTR 0x124
>> +#define SRC_DSCR_WRD0 0x128
>> +#define SRC_DSCR_WRD1 0x12C
>> +#define SRC_DSCR_WRD2 0x130
>> +#define SRC_DSCR_WRD3 0x134
>> +#define DST_DSCR_WRD0 0x138
>> +#define DST_DSCR_WRD1 0x13C
>> +#define DST_DSCR_WRD2 0x140
>> +#define DST_DSCR_WRD3 0x144
>> +#define SRC_START_LSB 0x158
>> +#define SRC_START_MSB 0x15C
>> +#define DST_START_LSB 0x160
>> +#define DST_START_MSB 0x164
>> +#define TOTAL_BYTE 0x188
>> +#define RATE_CTRL 0x18C
>> +#define IRQ_SRC_ACCT 0x190
>> +#define IRQ_DST_ACCT 0x194
>> +#define CTRL2 0x200
> Can you namespace these and other defines
Ok. just to be clear, you want to me to prefix ZYNQMP_DMA?
or you want me to add comments ?
I have defined the exact register names as per the zynqmp dma
spec,
>
>> +struct zynqmp_dma_chan {
>> + struct zynqmp_dma_device *xdev;
> xdev seems an odd name, i suspect copy paste error!
I will change the name.
>
>> + void __iomem *regs;
>> + spinlock_t lock;
>> + struct list_head pending_list;
>> + struct list_head free_list;
>> + struct list_head active_list;
>> + struct zynqmp_dma_desc_sw *sw_desc_pool;
>> + struct list_head done_list;
>> + struct dma_chan common;
>> + void *desc_pool_v;
>> + dma_addr_t desc_pool_p;
> why two pools and one void *?
>
>> +/**
>> + * zynqmp_dma_alloc_chan_resources - Allocate channel resources
>> + * @dchan: DMA channel
>> + *
>> + * Return: '0' on success and failure value on error
> wrong, its number of descriptors which maybe 0
Correct. I Will modify this.
>
>> + */
>> +static int zynqmp_dma_alloc_chan_resources(struct dma_chan *dchan)
>> +{
>> + struct zynqmp_dma_chan *chan = to_chan(dchan);
>> + struct zynqmp_dma_desc_sw *desc;
>> + int i;
>> +
>> + chan->sw_desc_pool = kzalloc(sizeof(*desc) * ZYNQMP_DMA_NUM_DESCS,
>> + GFP_KERNEL);
> and you are allocating the number so pls return that
Ok.
>
> Btw is ZYNQMP_DMA_NUM_DESCS sw or HW limit
Sw limit.
>
>> +static void zynqmp_dma_start_transfer(struct zynqmp_dma_chan *chan)
>> +{
>> + struct zynqmp_dma_desc_sw *desc;
>> +
>> + if (!zynqmp_dma_chan_is_idle(chan))
>> + return;
>> +
>> + desc = list_first_entry_or_null(&chan->pending_list,
>> + struct zynqmp_dma_desc_sw, node);
>> + if (!desc)
>> + return;
>> +
>> + if (chan->has_sg)
>> + list_splice_tail_init(&chan->pending_list, &chan->active_list);
>> + else
>> + list_move_tail(&desc->node, &chan->active_list);
>> +
>> + if (chan->has_sg)
>> + zynqmp_dma_update_desc_to_ctrlr(chan, desc);
>> + else
>> + zynqmp_dma_config_simple_desc(chan, desc->src, desc->dst,
>> + desc->len);
>> + zynqmp_dma_start(chan);
>> +}
> Lots of the list management will get simplified if you use the vchan to do
> so
I have explored using the virt-dma to reduce the common list processing, But
in this driver descriptor processing and cleaning is happening inside
the tasklet
context and virt-dma assumes it is happening in interrupt context and using the
spin locks accordingly. So, added code for the list management in side
the driver.
>
>> +
>> +
>> +/**
>> + * zynqmp_dma_chan_desc_cleanup - Cleanup the completed descriptors
>> + * @chan: ZynqMP DMA channel
>> + */
>> +static void zynqmp_dma_chan_desc_cleanup(struct zynqmp_dma_chan *chan)
>> +{
>> + struct zynqmp_dma_desc_sw *desc, *next;
>> +
>> + list_for_each_entry_safe(desc, next, &chan->done_list, node) {
>> + dma_async_tx_callback callback;
>> + void *callback_param;
>> +
>> + list_del(&desc->node);
>> +
>> + callback = desc->async_tx.callback;
>> + callback_param = desc->async_tx.callback_param;
>> + if (callback)
>> + callback(callback_param);
>> +
> and you are calling the callback with lock held and user can do further
> submissions so this is wrong!
is it that driver should have separate temp list and fill this list
with the descriptors in
done_list and process them with out lock held ?
please suggest.
>
>> +static enum dma_status zynqmp_dma_tx_status(struct dma_chan *dchan,
>> + dma_cookie_t cookie,
>> + struct dma_tx_state *txstate)
>> +{
>> + return dma_cookie_status(dchan, cookie, txstate);
>
> no residue calculation?
Controller has total byte count register that Indicates total number of bytes
transferred since last clear. But since we implemented the Hw queuing it
is difficult to get residue calculation by relying on the above register value.
So, at least for this version of the driver no residue calculation.
>
>> +static struct dma_async_tx_descriptor *zynqmp_dma_prep_memcpy(
>> + struct dma_chan *dchan, dma_addr_t dma_dst,
>> + dma_addr_t dma_src, size_t len, ulong flags)
>> +{
>> + struct zynqmp_dma_chan *chan;
>> + struct zynqmp_dma_desc_sw *new, *first = NULL;
>> + void *desc = NULL, *prev = NULL;
>> + size_t copy;
>> + u32 desc_cnt;
>> +
>> + chan = to_chan(dchan);
>> +
>> + if ((len > ZYNQMP_DMA_MAX_TRANS_LEN) && !chan->has_sg)
> why sg?
Controller supports two types of modes.
Simple dma mode:
In this mode, DMA transfer parameters are specified in APB registers
So, queuing the new request in hw is not possible when the channel
is busy with
previous transfer and also it doesn't have SG support.
Max transfer size per transfer is 1GB.
Scatter gather dma mode:
Transfer parameters are specified in the buffer descriptors (BD).
Max transfer size per BD is 1GB and Dma transaction can have multiple BDs
The above condition is to ensure that when the controller is
configured for Simple
Dma mode, allow the transfers that are with in 1GB size if not it return error.
>
>> +static int zynqmp_dma_remove(struct platform_device *pdev)
>> +{
>> + struct zynqmp_dma_device *xdev = platform_get_drvdata(pdev);
>> +
>> + of_dma_controller_free(pdev->dev.of_node);
>> + dma_async_device_unregister(&xdev->common);
>> +
>> + zynqmp_dma_chan_remove(xdev->chan);
> Please free up irq here explictly and also ensure tasklet is not running
irq free is not required as cleaning will be taken care by the devm framework.
tasklet cleaning is happening inside the zynqmp_chan_remove function.
Regards,
Punnaiah
>
> --
> ~Vinod
>
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
