The new coming Intel platforms such as Skylake will contain Sunrisepoint PCH. The driver is based on MFD framework since the main device, i.e. serial bus controller, contains register space for itself, DMA part, and an additional address space (convergence layer). The public specification of the register map is avaiable in [1]. This is third generation of the patch series to bring support LPSS devices found on Intel Sunrisepoint (Intel Skylake PCH). Previous one can be found here [2]. The series has few logical parts: - patches 1-3 prepares PM core, ACPI, and driver core (PM) to handle our case - patches 4-6 introduce unregistering platform devices in MFD in reversed order - patch 7 implements iDMA 64-bit driver - patch 8 introduces an MFD driver for LPSS devices The patch 8 depends on clkdev_create() helper that has been introduced by Russel King in [3]. The driver has been tested with SPI and UART on Intel Skylake PCH. [1] https://download.01.org/future-platform-configuration-hub/skylake/register-definitions/332219_001_Final.pdf [2] https://lkml.org/lkml/2015/5/25/298 [3] https://patchwork.linuxtv.org/patch/28464/ Changelog v3: - rework patch 3 to be used for all kind of devices (address Alan comment) - iDMA 64-bit driver improvements: - fix burst-to-register conversion - remove excessive locking - do not expose core part to the user (Kconfig) - address most of Lee's comments - append ACKs - rebase on top of v4.1-rc6 Changelog v2: - new DMA driver to fully support iDMA 64-bit IP - patch 3 is added to wake up parent devices when ->probe(), ->remove(), or ->shutdown() - MFD core is unregistering devices in reversed order - address few Lee's comments on v1 - address Russel's comment, therefore use clkdev_create() helper - intel-lpss{,-acpi,-pci} are modified regarding to above changes Andy Shevchenko (5): klist: implement klist_prev() driver core: implement device_for_each_child_reverse() mfd: make mfd_remove_devices() iterate in reverse order dmaengine: add a driver for Intel integrated DMA 64-bit mfd: Add support for Intel Sunrisepoint LPSS devices Heikki Krogerus (1): Driver core: wakeup the parent device before trying probe Mika Westerberg (2): PM / QoS: Make it possible to expose device latency tolerance to userspace ACPI / PM: Attach ACPI power domain only once drivers/acpi/device_pm.c | 8 + drivers/acpi/internal.h | 2 + drivers/acpi/scan.c | 46 ++- drivers/base/core.c | 43 +++ drivers/base/dd.c | 8 + drivers/base/power/power.h | 2 + drivers/base/power/qos.c | 37 +++ drivers/base/power/sysfs.c | 11 + drivers/dma/Kconfig | 5 + drivers/dma/Makefile | 1 + drivers/dma/idma64.c | 724 ++++++++++++++++++++++++++++++++++++++++++ drivers/dma/idma64.h | 232 ++++++++++++++ drivers/mfd/Kconfig | 23 ++ drivers/mfd/Makefile | 3 + drivers/mfd/intel-lpss-acpi.c | 84 +++++ drivers/mfd/intel-lpss-pci.c | 113 +++++++ drivers/mfd/intel-lpss.c | 524 ++++++++++++++++++++++++++++++ drivers/mfd/intel-lpss.h | 62 ++++ drivers/mfd/mfd-core.c | 2 +- include/linux/device.h | 2 + include/linux/klist.h | 1 + include/linux/pm_qos.h | 5 + lib/klist.c | 41 +++ 23 files changed, 1962 insertions(+), 17 deletions(-) create mode 100644 drivers/dma/idma64.c create mode 100644 drivers/dma/idma64.h create mode 100644 drivers/mfd/intel-lpss-acpi.c create mode 100644 drivers/mfd/intel-lpss-pci.c create mode 100644 drivers/mfd/intel-lpss.c create mode 100644 drivers/mfd/intel-lpss.h -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
