Hi, The series adds support for DMA router type of devices. They are used in SoCs which has more peripherals with DMA request lines than the DMA controller can handle. The router itself is not part of the DMA controller and it's operation should be transparent (as it is in the HW) for the SW stack. This series takes into accound the comments Sricharan received for his version of the crossbar driver: https://lkml.org/lkml/2014/3/7/199 This implementation is not tied to any DMA driver so it is possible to use the framework by other vendors, also ACPI version of binding can be easy enough to be added. The omap-dma part of changes are based on the dma property name change series: https://lkml.org/lkml/2015/2/20/182 but the code has fallback so it is working w/o the changes in that series. Regards, Peter --- Peter Ujfalusi (6): dmaengine: of_dma: Support for DMA routers dmaengine: Add driver for TI DMA crossbar on DRA7x dmaengine: omap-dma: Use defines for dma channels and request count dmaengine: omap-dma: Take DMA request number from DT if it is available dmaengine: omap-dma: Remove mapping between virtual channels and requests ARM: DTS: dra7x: Integrate sDMA crossbar Documentation/devicetree/bindings/dma/dma.txt | 27 ++++ arch/arm/boot/dts/dra7.dtsi | 57 ++++---- drivers/dma/Kconfig | 4 + drivers/dma/Makefile | 1 + drivers/dma/dmaengine.c | 7 + drivers/dma/of-dma.c | 92 +++++++++++++ drivers/dma/omap-dma.c | 24 +++- drivers/dma/ti-dma-crossbar.c | 191 ++++++++++++++++++++++++++ include/linux/dmaengine.h | 17 +++ include/linux/of_dma.h | 21 +++ 10 files changed, 413 insertions(+), 28 deletions(-) create mode 100644 drivers/dma/ti-dma-crossbar.c -- 2.3.0 -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
