[PATCH 4/8 v2] mtd: sh_flctl: remove slave_id settings for DMAEngine

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Arnd Bergmann <arnd@xxxxxxxx>

Current sh_flctl sets dma_slave_config :: slave_id field for DMAEngine,
but it is no longer needed. Let's remove it.

Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
---
v1 -> v2

 - separate into shdma and others

 drivers/mtd/nand/sh_flctl.c |    2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index a21c378..c3ce81c 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -159,7 +159,6 @@ static void flctl_setup_dma(struct sh_flctl *flctl)
 		return;
 
 	memset(&cfg, 0, sizeof(cfg));
-	cfg.slave_id = pdata->slave_id_fifo0_tx;
 	cfg.direction = DMA_MEM_TO_DEV;
 	cfg.dst_addr = (dma_addr_t)FLDTFIFO(flctl);
 	cfg.src_addr = 0;
@@ -175,7 +174,6 @@ static void flctl_setup_dma(struct sh_flctl *flctl)
 	if (!flctl->chan_fifo0_rx)
 		goto err;
 
-	cfg.slave_id = pdata->slave_id_fifo0_rx;
 	cfg.direction = DMA_DEV_TO_MEM;
 	cfg.dst_addr = 0;
 	cfg.src_addr = (dma_addr_t)FLDTFIFO(flctl);
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux