From: Arnd Bergmann <arnd@xxxxxxxx>
The shmobile platform is one of only two users of the slave_id field
in dma_slave_config, which is incompatible with the way that the
dmaengine API normally works.
I've had a closer look at the existing code now and found that all
slave drivers that pass a slave_id in dma_slave_config for SH do that
right after passing the same ID into shdma_chan_filter, so we can just
rely on that. However, the various shdma drivers currently do not
remember the slave ID that was passed into the filter function when
used in non-DT mode and only check the value to find a matching channel,
unlike all other drivers.
There might still be drivers that are not part of the kernel that rely
on setting the slave_id to some other value, so to be on the safe side,
this adds another 'real_slave_id' field to shdma_chan that remembers
the ID and uses it when a driver passes a zero slave_id in dma_slave_config,
like most drivers do.
Eventually, the real_slave_id and slave_id fields should just get merged
into one field, but that requires other changes.
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
---
drivers/dma/sh/shdma-base.c | 72 ++++++++++++++++++++++++++-----------
drivers/mmc/host/sh_mmcif.c | 12 +++----
drivers/mmc/host/sh_mobile_sdhi.c | 2 --
drivers/mmc/host/tmio_mmc.h | 2 --
drivers/mmc/host/tmio_mmc_dma.c | 4 ---
drivers/mtd/nand/sh_flctl.c | 2 --
drivers/spi/spi-rspi.c | 1 -
drivers/spi/spi-sh-msiof.c | 1 -
include/linux/shdma-base.h | 1 +
9 files changed, 58 insertions(+), 39 deletions(-)
diff --git a/drivers/dma/sh/shdma-base.c b/drivers/dma/sh/shdma-base.c
index 8ee383d..1a8050a9 100644
--- a/drivers/dma/sh/shdma-base.c
+++ b/drivers/dma/sh/shdma-base.c
@@ -171,8 +171,7 @@ static struct shdma_desc *shdma_get_desc(struct shdma_chan *schan)
return NULL;
}
-static int shdma_setup_slave(struct shdma_chan *schan, int slave_id,
- dma_addr_t slave_addr)
+static int shdma_setup_slave(struct shdma_chan *schan, dma_addr_t slave_addr)
{
struct shdma_dev *sdev = to_shdma_dev(schan->dma_chan.device);
const struct shdma_ops *ops = sdev->ops;
@@ -183,25 +182,23 @@ static int shdma_setup_slave(struct shdma_chan *schan, int slave_id,
ret = ops->set_slave(schan, match, slave_addr, true);
if (ret < 0)
return ret;
-
- slave_id = schan->slave_id;
} else {
- match = slave_id;
+ match = schan->real_slave_id;
}
- if (slave_id < 0 || slave_id >= slave_num)
+ if (schan->real_slave_id < 0 || schan->real_slave_id >= slave_num)
return -EINVAL;
- if (test_and_set_bit(slave_id, shdma_slave_used))
+ if (test_and_set_bit(schan->real_slave_id, shdma_slave_used))
return -EBUSY;
ret = ops->set_slave(schan, match, slave_addr, false);
if (ret < 0) {
- clear_bit(slave_id, shdma_slave_used);
+ clear_bit(schan->real_slave_id, shdma_slave_used);
return ret;
}
- schan->slave_id = slave_id;
+ schan->slave_id = schan->real_slave_id;
return 0;
}
@@ -221,10 +218,12 @@ static int shdma_alloc_chan_resources(struct dma_chan *chan)
*/
if (slave) {
/* Legacy mode: .private is set in filter */
- ret = shdma_setup_slave(schan, slave->slave_id, 0);
+ schan->real_slave_id = slave->slave_id;
+ ret = shdma_setup_slave(schan, 0);
if (ret < 0)
goto esetslave;
} else {
+ /* Normal mode: real_slave_id was set by filter */
schan->slave_id = -EINVAL;
}
@@ -258,11 +257,14 @@ esetslave:
/*
* This is the standard shdma filter function to be used as a replacement to the
- * "old" method, using the .private pointer. If for some reason you allocate a
- * channel without slave data, use something like ERR_PTR(-EINVAL) as a filter
+ * "old" method, using the .private pointer.
+ * You always have to pass a valid slave id as the argument, old drivers that
+ * pass ERR_PTR(-EINVAL) as a filter parameter and set it up in dma_slave_config
+ * need to be updated so we can remove the slave_id field from dma_slave_config.
* parameter. If this filter is used, the slave driver, after calling
* dma_request_channel(), will also have to call dmaengine_slave_config() with
- * .slave_id, .direction, and either .src_addr or .dst_addr set.
+ * .direction, and either .src_addr or .dst_addr set.
+ *
* NOTE: this filter doesn't support multiple DMAC drivers with the DMA_SLAVE
* capability! If this becomes a requirement, hardware glue drivers, using this
* services would have to provide their own filters, which first would check
@@ -276,7 +278,7 @@ bool shdma_chan_filter(struct dma_chan *chan, void *arg)
{
struct shdma_chan *schan;
struct shdma_dev *sdev;
- int match = (long)arg;
+ int slave_id = (long)arg;
int ret;
/* Only support channels handled by this driver. */
@@ -284,16 +286,35 @@ bool shdma_chan_filter(struct dma_chan *chan, void *arg)
shdma_alloc_chan_resources)
return false;
- if (match < 0)
+ schan = to_shdma_chan(chan);
+ sdev = to_shdma_dev(chan->device);
+
+ /*
+ * For DT, the schan->slave_id field is generated by the
+ * set_slave function from the slave ID that is passed in
+ * from xlate. For the non-DT case, the slave ID is
+ * directly passed into the filter function by the driver
+ */
+ if (schan->dev->of_node) {
+ ret = sdev->ops->set_slave(schan, slave_id, 0, true);
+ if (ret < 0)
+ return false;
+
+ schan->real_slave_id = schan->slave_id;
+ return true;
+ }
+
+ if (slave_id < 0) {
/* No slave requested - arbitrary channel */
+ dev_warn(sdev->dma_dev.dev, "invalid slave ID passed to dma_request_slave\n");
return true;
+ }
- schan = to_shdma_chan(chan);
- if (!schan->dev->of_node && match >= slave_num)
+ if (slave_id >= slave_num)
return false;
- sdev = to_shdma_dev(schan->dma_chan.device);
- ret = sdev->ops->set_slave(schan, match, 0, true);
+ schan->real_slave_id = slave_id;
+ ret = sdev->ops->set_slave(schan, schan->real_slave_id, 0, true);
if (ret < 0)
return false;
@@ -452,6 +473,8 @@ static void shdma_free_chan_resources(struct dma_chan *chan)
chan->private = NULL;
}
+ schan->real_slave_id = 0;
+
spin_lock_irq(&schan->chan_lock);
list_splice_init(&schan->ld_free, &list);
@@ -764,11 +787,20 @@ static int shdma_config(struct dma_chan *chan,
*/
if (!config)
return -EINVAL;
+
+ /*
+ * overriding the slave_id through dma_slave_config is deprecated,
+ * but possibly some out-of-tree drivers still do it.
+ */
+ if (WARN_ON_ONCE(config->slave_id &&
+ config->slave_id != schan->real_slave_id))
+ schan->real_slave_id = config->slave_id;
+
/*
* We could lock this, but you shouldn't be configuring the
* channel, while using it...
*/
- return shdma_setup_slave(schan, config->slave_id,
+ return shdma_setup_slave(schan,
config->direction == DMA_DEV_TO_MEM ?
config->src_addr : config->dst_addr);
}
diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index 7d9d6a3..5f1ba9c 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -388,7 +388,7 @@ sh_mmcif_request_dma_one(struct sh_mmcif_host *host,
{
struct dma_slave_config cfg = { 0, };
struct dma_chan *chan;
- unsigned int slave_id;
+ void *slave_data;
struct resource *res;
dma_cap_mask_t mask;
int ret;
@@ -397,13 +397,13 @@ sh_mmcif_request_dma_one(struct sh_mmcif_host *host,
dma_cap_set(DMA_SLAVE, mask);
if (pdata)
- slave_id = direction == DMA_MEM_TO_DEV
- ? pdata->slave_id_tx : pdata->slave_id_rx;
+ slave_data = direction == DMA_MEM_TO_DEV
+ ? (void *)pdata->slave_id_tx : (void *)pdata->slave_id_rx;
else
- slave_id = 0;
+ slave_data = 0;
chan = dma_request_slave_channel_compat(mask, shdma_chan_filter,
- (void *)(unsigned long)slave_id, &host->pd->dev,
+ slave_data, &host->pd->dev,
direction == DMA_MEM_TO_DEV ? "tx" : "rx");
dev_dbg(&host->pd->dev, "%s: %s: got channel %p\n", __func__,
@@ -414,8 +414,6 @@ sh_mmcif_request_dma_one(struct sh_mmcif_host *host,
res = platform_get_resource(host->pd, IORESOURCE_MEM, 0);
- /* In the OF case the driver will get the slave ID from the DT */
- cfg.slave_id = slave_id;
cfg.direction = direction;
if (direction == DMA_DEV_TO_MEM) {
diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c
index 6906a90..11991f5 100644
--- a/drivers/mmc/host/sh_mobile_sdhi.c
+++ b/drivers/mmc/host/sh_mobile_sdhi.c
@@ -261,8 +261,6 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
*/
dma_priv->chan_priv_tx = (void *)p->dma_slave_tx;
dma_priv->chan_priv_rx = (void *)p->dma_slave_rx;
- dma_priv->slave_id_tx = p->dma_slave_tx;
- dma_priv->slave_id_rx = p->dma_slave_rx;
}
}
dma_priv->filter = shdma_chan_filter;
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index fc3805e..1aea5c6 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -45,8 +45,6 @@ struct tmio_mmc_host;
struct tmio_mmc_dma {
void *chan_priv_tx;
void *chan_priv_rx;
- int slave_id_tx;
- int slave_id_rx;
enum dma_slave_buswidth dma_buswidth;
bool (*filter)(struct dma_chan *chan, void *arg);
void (*enable)(struct tmio_mmc_host *host, bool enable);
diff --git a/drivers/mmc/host/tmio_mmc_dma.c b/drivers/mmc/host/tmio_mmc_dma.c
index 331bb61..8dbd785 100644
--- a/drivers/mmc/host/tmio_mmc_dma.c
+++ b/drivers/mmc/host/tmio_mmc_dma.c
@@ -286,8 +286,6 @@ void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdat
if (!host->chan_tx)
return;
- if (host->dma->chan_priv_tx)
- cfg.slave_id = host->dma->slave_id_tx;
cfg.direction = DMA_MEM_TO_DEV;
cfg.dst_addr = res->start + (CTL_SD_DATA_PORT << host->bus_shift);
cfg.dst_addr_width = host->dma->dma_buswidth;
@@ -307,8 +305,6 @@ void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdat
if (!host->chan_rx)
goto ereqrx;
- if (host->dma->chan_priv_rx)
- cfg.slave_id = host->dma->slave_id_rx;
cfg.direction = DMA_DEV_TO_MEM;
cfg.src_addr = cfg.dst_addr + host->pdata->dma_rx_offset;
cfg.src_addr_width = host->dma->dma_buswidth;
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index a21c378..c3ce81c 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -159,7 +159,6 @@ static void flctl_setup_dma(struct sh_flctl *flctl)
return;
memset(&cfg, 0, sizeof(cfg));
- cfg.slave_id = pdata->slave_id_fifo0_tx;
cfg.direction = DMA_MEM_TO_DEV;
cfg.dst_addr = (dma_addr_t)FLDTFIFO(flctl);
cfg.src_addr = 0;
@@ -175,7 +174,6 @@ static void flctl_setup_dma(struct sh_flctl *flctl)
if (!flctl->chan_fifo0_rx)
goto err;
- cfg.slave_id = pdata->slave_id_fifo0_rx;
cfg.direction = DMA_DEV_TO_MEM;
cfg.dst_addr = 0;
cfg.src_addr = (dma_addr_t)FLDTFIFO(flctl);
diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
index 2071f78..6cbcdc0 100644
--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -918,7 +918,6 @@ static struct dma_chan *rspi_request_dma_chan(struct device *dev,
}
memset(&cfg, 0, sizeof(cfg));
- cfg.slave_id = id;
cfg.direction = dir;
if (dir == DMA_MEM_TO_DEV) {
cfg.dst_addr = port_addr;
diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index 239be7c..786ac9e 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -984,7 +984,6 @@ static struct dma_chan *sh_msiof_request_dma_chan(struct device *dev,
}
memset(&cfg, 0, sizeof(cfg));
- cfg.slave_id = id;
cfg.direction = dir;
if (dir == DMA_MEM_TO_DEV) {
cfg.dst_addr = port_addr;
diff --git a/include/linux/shdma-base.h b/include/linux/shdma-base.h
index abdf1f2..dd0ba50 100644
--- a/include/linux/shdma-base.h
+++ b/include/linux/shdma-base.h
@@ -69,6 +69,7 @@ struct shdma_chan {
int id; /* Raw id of this channel */
int irq; /* Channel IRQ */
int slave_id; /* Client ID for slave DMA */
+ int real_slave_id; /* argument passed to filter function */
int hw_req; /* DMA request line for slave DMA - same
* as MID/RID, used with DT */
enum shdma_pm_state pm_state;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
