Re: [PATCH v9 2/4] amba: Don't unprepare the clocks if device driver wants IRQ safe runtime PM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed 2014-11-05 09:42:58, Krzysztof Kozlowski wrote:
> On wto, 2014-11-04 at 21:18 +0100, Pavel Machek wrote:
> > On Tue 2014-11-04 13:52:48, Krzysztof Kozlowski wrote:
> > > The AMBA bus driver defines runtime Power Management functions which
> > > disable and unprepare AMBA bus clock. This is problematic for runtime PM
> > > because unpreparing a clock might sleep so it is not interrupt safe.
> > > 
> > > However some drivers may want to implement runtime PM functions in
> > > interrupt-safe way (see pm_runtime_irq_safe()). In such case the AMBA
> > > bus driver should only disable/enable the clock in runtime suspend and
> > > resume callbacks.
> > 
> > 
> > 
> > >  /*
> > >   * Hooks to provide runtime PM of the pclk (bus clock).  It is safe to
> > >   * enable/disable the bus clock at runtime PM suspend/resume as this
> > > @@ -95,8 +102,14 @@ static int amba_pm_runtime_suspend(struct device *dev)
> > >  	struct amba_device *pcdev = to_amba_device(dev);
> > >  	int ret = pm_generic_runtime_suspend(dev);
> > >  
> > > -	if (ret == 0 && dev->driver)
> > > -		clk_disable_unprepare(pcdev->pclk);
> > > +	if (ret == 0 && dev->driver) {
> > > +		pcdev->irq_safe = get_pm_runtime_irq_safe(dev);
> > > +
> > > +		if (pcdev->irq_safe)
> > > +			clk_disable(pcdev->pclk);
> > > +		else
> > > +			clk_disable_unprepare(pcdev->pclk);
> > > +	}
> > 
> > So you can handle the case of !pcdev->irq_safe. What is the penalty
> > for always assuming !pcdev->irq_safe?
> 
> The penalty (for pl330 driver) would be that the runtime resume/suspend
> cannot happen from atomic context
>   => pm_runtime_get_sync() cannot be called from atomic context
>     => complete rework of runtime PM for pl330 DMA driver because now
>        one of pm_runtime_get_sync() calls is in device_issue_pending
>        callback which may not sleep. And by "rework" I also mean that
>        I do not know how to do this... yet.

I still don't get it. You say that you don't know how to handle
!pcdev->irq_safe case... Yet have code above that tries to handle it.

If that case can't be sanely handled, I'd expect
BUG_ON(!pcdev->irq_safe).
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux