Re: [PATCH v10 3/5] amba: Don't unprepare the clocks if device driver wants IRQ safe runtime PM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 6 November 2014 09:36, Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx> wrote:
> The AMBA bus driver defines runtime Power Management functions which
> disable and unprepare AMBA bus clock. This is problematic for runtime PM
> because unpreparing a clock might sleep so it is not interrupt safe.
>
> However some drivers may want to implement runtime PM functions in
> interrupt-safe way (see pm_runtime_irq_safe()). In such case the AMBA
> bus driver should only disable/enable the clock in runtime suspend and
> resume callbacks.
>
> Detect the device driver behavior during runtime suspend. During runtime
> resume deal with clocks according to stored value.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>

Reviewed-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>

> ---
>  drivers/amba/bus.c       | 17 +++++++++++++----
>  include/linux/amba/bus.h |  1 +
>  2 files changed, 14 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
> index 47bbdc1b5be3..356f906c6966 100644
> --- a/drivers/amba/bus.c
> +++ b/drivers/amba/bus.c
> @@ -95,8 +95,14 @@ static int amba_pm_runtime_suspend(struct device *dev)
>         struct amba_device *pcdev = to_amba_device(dev);
>         int ret = pm_generic_runtime_suspend(dev);
>
> -       if (ret == 0 && dev->driver)
> -               clk_disable_unprepare(pcdev->pclk);
> +       if (ret == 0 && dev->driver) {
> +               pcdev->irq_safe = dev->power.irq_safe;
> +
> +               if (pcdev->irq_safe)
> +                       clk_disable(pcdev->pclk);
> +               else
> +                       clk_disable_unprepare(pcdev->pclk);
> +       }
>
>         return ret;
>  }
> @@ -107,7 +113,10 @@ static int amba_pm_runtime_resume(struct device *dev)
>         int ret;
>
>         if (dev->driver) {
> -               ret = clk_prepare_enable(pcdev->pclk);
> +               if (pcdev->irq_safe)
> +                       ret = clk_enable(pcdev->pclk);
> +               else
> +                       ret = clk_prepare_enable(pcdev->pclk);
>                 /* Failure is probably fatal to the system, but... */
>                 if (ret)
>                         return ret;
> @@ -115,7 +124,7 @@ static int amba_pm_runtime_resume(struct device *dev)
>
>         return pm_generic_runtime_resume(dev);
>  }
> -#endif
> +#endif /* CONFIG_PM */
>
>  static const struct dev_pm_ops amba_pm = {
>         .suspend        = pm_generic_suspend,
> diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
> index ac02f9bd63dc..c4bae79851fb 100644
> --- a/include/linux/amba/bus.h
> +++ b/include/linux/amba/bus.h
> @@ -32,6 +32,7 @@ struct amba_device {
>         struct clk              *pclk;
>         unsigned int            periphid;
>         unsigned int            irq[AMBA_NR_IRQS];
> +       unsigned int            irq_safe:1;
>  };
>
>  struct amba_driver {
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux