Re: [PATCH v2 0/3] ARM: sun8i: Add DMA controller support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Nov 6, 2014 at 3:11 PM, Vinod Koul <vinod.koul@xxxxxxxxx> wrote:
> On Fri, Sep 26, 2014 at 11:06:01AM +0800, Chen-Yu Tsai wrote:
>> On Thu, Sep 18, 2014 at 11:24 AM, Chen-Yu Tsai <wens@xxxxxxxx> wrote:
>> > Hi everyone,
>> >
>> > This is v2 of my sun8i DMA controller support series. This series
>> > adds support for the DMA controller found in the Allwinner A23 SoC.
>> > It is the same hardware as found in the A31 (sun6i) SoC. In addition
>> > to reduced physical channels and endpoints, the controller in the A23
>> > requires an undocumented register to be toggled. That seems to allow
>> > memory bus access.
>> >
>> > This series is based on my earlier "clk: sun6i: Unify AHB1 clock and
>> > fix rate calculation" series, which removes the clock muxing calls from
>> > the sun6i-dma driver. The default PLL6 pre-divider for AHB1 on the A23
>> > results in an exceedingly high clock rate for AHB1, and the system hangs.
>> > Also, on the A23, the dma controller happily works even when AHB1 is
>> > clocked from AXI.
>> >
>> >
>> > Patch 1 changes the channel count macros into runtime data binded to
>> > the DT compatible strings. It also gets rid of some hardcoded values
>> > in the interrupt handler.
>> >
>> > Patch 2 adds the channel number data for the A23 (sun8i), as well as
>> > the undocumented register quirk.
>>
>> Hi, Vinod,
>>
>> Any chance we can get patches 1 & 2 merged? You've already merged the
>> prerequisite patch "dmaengine: sun6i: Remove obsolete clk muxing code"
>> a few days ago, and patch 3 is already in arm-soc.
>
> Hi ChenYu,
>
> The patches look fine to me so I tried applying them but they fail to apply,
> can you please rebase these two and resend

Hi Vinod,

Could you publish an updated slave-dma/next branch? Currently I see it at
v3.18-rc1. And the series rebases cleanly onto it with no differences.

I'm guessing some of Maxime's cleanup work is the source of conflict.

Thanks
ChenYu
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux