Re: [PATCH] dmaengine: pl330: use subsys_initcall

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/17/2014 4:15 AM, Lars-Peter Clausen wrote:
On 10/17/2014 09:35 AM, Vinod Koul wrote:
On Fri, Oct 17, 2014 at 09:45:45AM +0200, Lars-Peter Clausen wrote:
On 10/17/2014 02:48 AM, Ray Jui wrote:
As part of subsystem that many slave drivers depend on, it's more
appropriate for the pl330 DMA driver to be initialized at
subsys_initcall than device_initcall

Well, we do have -EPROBE_DEFER these days to handle these kinds of
dependencies so we no longer have to these kinds of manual init
reordering tricks.
How ould that work?

Consider for example SPI and dmanegine. SPI driver got probed, then to
start
a transaction requested a channel... while dmaengine driver is still
getting
probed/not probed yet. So SPI driver didnt get a channel.


Ideally the SPI driver requests the channel in probe function and if the
DMA controller is not yet probed returns EPROBE_DEFER. If the SPI driver
requests the channel in the transfer handler it needs to deal with being
able to fall back to non DMA transfers anyway so this shouldn't be a
problem.
So in the case of the spi-pl022 driver. It requests the channel in probe function. And obviously DMA is not mandatory, so when the channel request fails the probe won't fail and instead it falls back to PIO. In this case, can you recommend a different way to solve this problem without having the DMA driver probed earlier than its slaves?


But in any case fiddling around with the init sequences is just a quick
hack and might makes the problem less likely to appear in some cases,
but there is no guarantee that it works. And I think the proper solution
at the moment is to use probe deferral.
I think it makes sense to have the DMA driver, as one of the core components in various SoCs that a lot of peripheral drivers depend on, to be registered at the level of subsys_init or somewhere close. We are not changing this just to get SPI to work. We are changing this because we think DMA should be ready before a lot of its slaves, which are typically done at device_initcall.

I have no problem relying on EPROBE_DEFER for this, provided that it works. The issue is, like I mentioned above, for a lot of slave devices DMA is not mandatory, when DMA fails at probe they would fall back to PIO and never use DMA. Another disadvantage I see with EPROBE_DEFER is delayed boot time.


Other subsystems have seen patches which moved drivers from using
subsys_initcall to device_initcall/module_..._driver/ with the reasoning
that this is no longer necessary because of EPROBE_DEFER. So I don't
think we should be doing the exact opposite in DMA framework. Also if
we'd apply this patch it won't take to long until somebody suggest going
back to module_platform_driver() instead of subsys_initcall.

- Lars
There are currently 12 DMA drivers under drivers/dma registering themselves at subsys_init. I don't see why pl330 cannot do the same. Is there any concern that it may not work for some other SoCs when it's done at subsys_init? So far I cannot think of any. The only dependency of pl330 is the ARM apb_pclk, required during AMBA bus probe. But that's usually ready before subsys_init.

Thanks,

Ray
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux