On Wed, Oct 01, 2014 at 04:59:24PM +0200, Ludovic Desroches wrote:
> Add bindings documentation for the new Atmel DMA controller (XDMAC)
> introduced with SAMA5D4.
Seeing the example below, it doesnt seem to me that we cant reuse existing
atmel binding, can you explain why we cnat reuse
--
~Vinod
>
> Signed-off-by: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
> Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
> ---
> .../devicetree/bindings/dma/atmel-xdma.txt | 50 ++++++++++++++++++++++
> 1 file changed, 50 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/dma/atmel-xdma.txt
>
> diff --git a/Documentation/devicetree/bindings/dma/atmel-xdma.txt b/Documentation/devicetree/bindings/dma/atmel-xdma.txt
> new file mode 100644
> index 0000000..ae587ad
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/atmel-xdma.txt
> @@ -0,0 +1,50 @@
> +* Atmel Extensible Direct Memory Access Controller (XDMAC)
> +
> +* XDMA Controller
> +Required properties:
> +- compatible: Should be "atmel,<chip>-dma".
> + <chip> compatible description:
> + - sama5d4: first SoC adding the XDMAC
> +- reg: Should contain DMA registers location and length.
> +- interrupts: Should contain DMA interrupt.
> +- #dma-cells: Must be <2>, used to represent the number of integer cells in
> +the dmas property of client devices.
> + - The 1st cell specifies the memory interface (16 most significant bits) and
> + the peripheral interface (16 less significant bits) to use.
> + - The 2nd cell specifies the channel configuration register:
> + - bit 30-24: PERID, peripheral identifier.
> +
> +Example:
> +
> +dma1: dma-controller@f0004000 {
> + compatible = "atmel,sama5d4-dma";
> + reg = <0xf0004000 0x200>;
> + interrupts = <50 4 0>;
> + #dma-cells = <2>;
> +};
> +
> +
> +* DMA clients
> +DMA clients connected to the Atmel XDMA controller must use the format
> +described in the dma.txt file, using a two-cell specifier for each channel.
> +The three cells in order are:
> +1. A phandle pointing to the DMA controller.
> +2. The memory interface (16 most significant bits), the peripheral interface
> +(16 less significant bits).
> +3. Channel configuration register. Configurable fields are:
> + - bit 30-24: PERID, peripheral identifier.
> +
> +Example:
> +
> +i2c2: i2c@f8024000 {
> + compatible = "atmel,at91sam9x5-i2c";
> + reg = <0xf8024000 0x4000>;
> + interrupts = <34 4 6>;
> + dmas = <&dma1
> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
> + AT91_XDMAC_DT_PERID(6)>,
> + <&dma1
> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
> + AT91_XDMAC_DT_PERID(7)>;
> + dma-names = "tx", "rx";
> +};
> --
> 2.0.3
>
--
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
