The previous code was relying on the fact that the slave_caps were to be
defined on a per channel basis.
However, this proved to be a bit overkill, since every driver filling these so
far were hardcoding it, disregarding which channel was actually given.
Add these capabilities to the dma_device structure, so that drivers can just
provide them at probe time, and be done with it.
Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
---
include/linux/dmaengine.h | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index cfcbee145898..e25a365b808c 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -594,6 +594,14 @@ struct dma_tx_state {
* @fill_align: alignment shift for memset operations
* @dev_id: unique device ID
* @dev: struct device reference for dma mapping api
+ * @src_addr_widths: bit mask of src addr widths the device supports
+ * @dst_addr_widths: bit mask of dst addr widths the device supports
+ * @directions: bit mask of slave direction the device supports since
+ * the enum dma_transfer_direction is not defined as bits for
+ * each type of direction, the dma controller should fill (1 <<
+ * <TYPE>) and same should be checked by controller as well
+ * @residue_granularity: granularity of the transfer residue reported
+ * by tx_status
* @device_alloc_chan_resources: allocate resources and return the
* number of allocated descriptors
* @device_free_chan_resources: release DMA channel's resources
@@ -643,6 +651,11 @@ struct dma_device {
int dev_id;
struct device *dev;
+ u32 src_addr_widths;
+ u32 dst_addr_widths;
+ u32 directions;
+ enum dma_residue_granularity residue_granularity;
+
int (*device_alloc_chan_resources)(struct dma_chan *chan);
void (*device_free_chan_resources)(struct dma_chan *chan);
@@ -783,6 +796,11 @@ static inline int dma_get_slave_caps(struct dma_chan *chan, struct dma_slave_cap
if (!test_bit(DMA_SLAVE, device->cap_mask.bits))
return -ENXIO;
+ caps->src_addr_widths = device->src_addr_widths;
+ caps->dst_addr_widths = device->dst_addr_widths;
+ caps->directions = device->directions;
+ caps->residue_granularity = device->residue_granularity;
+
caps->cmd_pause = !!device->device_pause;
caps->cmd_terminate = !!device->device_terminate_all;
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
