Re: [PATCH 3/7] clk: sunxi: unify sun6i AHB1 clock with proper PLL6 pre-divider

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Fri, Sep 12, 2014 at 5:02 AM, Maxime Ripard
<maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:
> Hi,
>
> On Sat, Sep 06, 2014 at 06:47:24PM +0800, Chen-Yu Tsai wrote:
>> This patch unifies the sun6i AHB1 clock, originally supported
>> with separate mux and divider clks. It also adds support for
>> the pre-divider on the PLL6 input, thus allowing the clock to
>> be muxed to PLL6 with proper clock rate calculation.
>>
>> Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
>
> It looks fine, but I'd rather see this in a separate file, especially
> since we don't seem to have any order dependency.

Sorry, just to be clear, separate file under clk/sunxi?

This cannot be in a separate file, as it shares a spinlock with apb1
divider. They share the same register.

We could move apb1 out though. But i would prefer to do that when
we split out all the clocks into individual OF_CLK_DECLAREs.

ChenYu
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux