Hi Vinod,
On Tue, Sep 9, 2014 at 9:27 PM, Vinod Koul <vinod.koul@xxxxxxxxx> wrote:
> On Tue, Sep 09, 2014 at 12:52:16AM +0530, Srikanth Thokala wrote:
>> Hi Vinod,
>>
>> On Thu, Sep 4, 2014 at 12:06 PM, Vinod Koul <vinod.koul@xxxxxxxxx> wrote:
>> > On Wed, Sep 03, 2014 at 12:17:43PM +0530, Srikanth Thokala wrote:
>> >> Hi Vinod,
>> >>
>> >> Apologies for the delay.
>> >>
>> >> On Tue, Aug 19, 2014 at 10:33 PM, Vinod Koul <vinod.koul@xxxxxxxxx> wrote:
>> >> > On Mon, Jul 28, 2014 at 05:47:49PM +0530, Srikanth Thokala wrote:
>> >> >> +struct xilinx_dma_chan {
>> >> >> + struct xilinx_dma_device *xdev;
>> >> >> + u32 ctrl_offset;
>> >> >> + spinlock_t lock;
>> >> >> + struct list_head pending_list;
>> >> >> + struct xilinx_dma_tx_descriptor *active_desc;
>> >> >> + struct xilinx_dma_tx_descriptor *allocated_desc;
>> >> >> + struct list_head done_list;
>> >> >> + struct list_head free_seg_list;
>> >> >> + struct dma_chan common;
>> >> >> + struct xilinx_dma_tx_segment *seg_v;
>> >> >> + dma_addr_t seg_p;
>> >> >> + struct device *dev;
>> >> >> + int irq;
>> >> >> + int id;
>> >> >> + enum dma_transfer_direction direction;
>> >> > This looks suspect. Why should channel have direction, for a descriptor it
>> >> > makes sense though.
>> >>
>> >> The channel only supports transfers in one direction. Either from memory to
>> >> peripheral or from peripheral to memory, that's fixed and can't be changed
>> >> at runtime. So, the driver needs to know which direction the channel supports
>> >> and hence it can reject transfers with the wrong direction.
>> > But you already have this information in descriptor so why duplicate?
>>
>> Our descriptor doesn't have the information of channel direction, we have this
>> information only in the chan structure (struct xilinx_dma_chan) which
>> is populated
>> while parsing the DT. So, we use this information to ensure if we are servicing
>> proper channel (in prep_slave_sg call).
> One of the argument of prep_slave_sg call is direction. You need to use that
> and store in in your descriptor for using it afterwards
>
>> FYI: We also need the direction of the channel so that we can select SRC/DST
>> register address in the issue_pending() call.
> And you have the descriptor there as well so can use it
Ok, got it. Thanks. I will send v4 with the changes mentioned.
- Srikanth
>
> --
> ~Vinod
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
