Pause/Resume can be used by the audio stack when the stream is paused/resumed The edma platform code has support for this and the legacy audio stack used this. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx> Acked-by: Joel Fernandes <joelf@xxxxxx> --- drivers/dma/edma.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c index 2742867fd1e6..7891378a03f0 100644 --- a/drivers/dma/edma.c +++ b/drivers/dma/edma.c @@ -240,6 +240,26 @@ static int edma_slave_config(struct edma_chan *echan, return 0; } +static int edma_dma_pause(struct edma_chan *echan) +{ + /* Pause/Resume only allowed with cyclic mode */ + if (!echan->edesc->cyclic) + return -EINVAL; + + edma_pause(echan->ch_num); + return 0; +} + +static int edma_dma_resume(struct edma_chan *echan) +{ + /* Pause/Resume only allowed with cyclic mode */ + if (!echan->edesc->cyclic) + return -EINVAL; + + edma_resume(echan->ch_num); + return 0; +} + static int edma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned long arg) { @@ -255,6 +275,14 @@ static int edma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, config = (struct dma_slave_config *)arg; ret = edma_slave_config(echan, config); break; + case DMA_PAUSE: + ret = edma_dma_pause(echan); + break; + + case DMA_RESUME: + ret = edma_dma_resume(echan); + break; + default: ret = -ENOSYS; } -- 1.9.2 -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html